DescriptionThis video provides step-by-step repair instructions for replacing the detergent dispenser on an LG dishwasher. The most common reason for replacing the detergent dispenser is when it isn’t dispensing detergent.
All of the information for this detergent dispenser replacement video is applicable to the following brands:
LG
Step-By-Step Instructions1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To replace the detergent dispenser your first step is to open the dishwasher door and remove the screws securing the outer door panel.
3
With the screws removed, pull the outer door panel off.
4
Now disconnect the wires from the old dispenser.
5
Remove the screws to release the upper and lower mounting brackets.
6
Use a putty knife to release the tabs and pull the old dispenser free.
7
Install the new detergent dispenser by aligning it on the inner door panel and snapping it into place.
8
Reposition the upper and lower support brackets and secure them with the screws.
9
Connect the wires to the new dispenser.
10
Reinstall the outer door panel by aligning the slots in the panel with the tabs on the bottom of the control panel.
12
You’re now ready to restore power to the dishwasher and confirm that it’s functioning properly.