Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool/Kenmore Gas Dryer Cycling Thermostat #3387134
Whirlpool/Kenmore Gas Dryer Cycling Thermostat #3387134
Skill Level
Total Parts Cost
$29.50Estimated Savings
$112.5001:08
- Description
This video provides step-by-step repair instructions for replacing the cycling thermostat on a Whirlpool/Kenmore gas dryer. The most common reasons for replacing the cycling thermostat are when the dryer won't heat, is too hot, takes too long, or won’t stop.
All of the information for this cycling thermostat replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Crosley, Inglis, Amana, Admiral
Tools needed: hex socket
All of the information for this cycling thermostat replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Crosley, Inglis, Amana, Admiral
Tools needed: hex socket
Step By Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the back panel.
3
Next, disconnect all four wires from the old cycling thermostat.
4
Remove the mounting screw and slide the thermostat out of the slot.
5
Install the new cycling thermostat by sliding it into the slot and securing it with the mounting screw.
6
Reconnect the four wires replace the back panel and plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the cycling thermostat on a Whirlpool/Kenmore gas dryer. The most common reasons for replacing the cycling thermostat are when the dryer won't heat, is too hot, takes too long, or won’t stop.
All of the information for this cycling thermostat replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Crosley, Inglis, Amana, Admiral
Tools needed: hex socket
All of the information for this cycling thermostat replacement video is applicable to the following brands:
Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Estate, Crosley, Inglis, Amana, Admiral
Tools needed: hex socket
Step-By-Step Instructions
1
As with any repair, be sure you’ve unplugged the appliance before beginning.
2
Your first step is to remove the back panel.
3
Next, disconnect all four wires from the old cycling thermostat.
4
Remove the mounting screw and slide the thermostat out of the slot.
5
Install the new cycling thermostat by sliding it into the slot and securing it with the mounting screw.
6
Reconnect the four wires replace the back panel and plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Cycling Thermostat
$29.50
Recommended Tools and Accessories
Multi Screwdriver
$59.00
Total$0.00
Related Articles & Videos
04:34
Part Replacement
Whirlpool Electric Washer/Dryer Combo Cycling Thermostat Replacement #WP3387134
02:30
Part Replacement
Whirlpool/Kenmore Gas Dryer Valve Solenoid Coil (2 Terminal) #694540
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com