DescriptionThis video provides step-by-step instructions for replacing the outer tub seal on LG dishwashers. The most common reason for replacing the seal is if it is worn or damaged, causing water to leak out of the sides or top of the dishwasher door.
All of the information in this seal replacement video is applicable to the following brands: LG
Step-By-Step Instructions1
As with any repair, be sure to turn off the power to your dishwasher before beginning.
2
To replace the outer tub seal your first step is to open the dishwasher door and remove the mounting bracket screws.
3
Now pull the dishwasher a couple of inches away from the cabinet.
4
If you have difficulty moving the dishwasher, you may need to disconnect the hoses and electrical wires.
5
With the dishwasher pulled out, unsnap the top to the old tub seal and lift it off.
6
Install the new outer tub seal by aligning it on the lip of the frame and sliding it down.
7
Snap the top of the seal into place.
8
Now slide the dishwasher back into the cabinet and replace the screws to secure the mounting brackets to the cabinet or countertop.
9
You’re now ready to restore power to the dishwasher and confirm that it’s functioning properly.