If your Dacor dishwasher is not cleaning, not cleaning dishes, or leaving dishes dirty after a cycle, the problem usually comes down to water flow, spray coverage, or water temperature. The most common cause is a failing or clogged water inlet valve, which can keep the dishwasher from filling with enough water to wash properly. Next, check for improper loading, since tightly packed dishes can block spray from reaching every surface. Water temperature matters too. If the incoming hot water is below 120°F, your Dacor dishwasher may not wash properly and dishes may still be dirty after the dishwasher cycle. After that, inspect the center wash arm support, center wash arm assembly, and lower wash arm assembly. A damaged support, poor connection to the water supply nozzle, or clogged spray arm holes can all reduce wash pressure and leave food behind, especially on one rack. Clear debris from the wash arm holes or replace worn parts if needed. To find the exact Dacor water inlet valve, wash arm, or support for your machine, enter your model number on RepairClinic.com.
01 - Dacor Dishwasher Water Inlet Valve
The water inlet valve opens to allow water to enter the dishwasher. If the valve is clogged or defective, the dishwasher won’t get enough water to clean dishes properly. If the water inlet valve is clogged, replace it. Do not attempt to clean the water inlet valve—cleaning the valve could make it more likely to fail.
Enter model number to search for the required part specific to your product
Improper loading will keep the water from cleaning the dishes. Make sure you are leaving enough space between the dishes.
Top Solution
03 - Improper water supply temperature
The water may not be hot enough. The recommended water supply temperature for a dishwasher to clean properly is 120 degrees Fahrenheit (49 degrees Celsius). If your hot water temperature is lower for safety reasons, try using a longer cycle that heats the water.
Top Solution
04 - Dacor Dishwasher Center Wash Arm Support
The center wash arm is attached to a support that is normally attached to the underside of the upper dishrack. Water flows through the support to the arm which circulates the water to the dishes in the upper rack. If the support is damaged or obstructed water may not flow properly. Inspect the support for any damage or obstruction and replace if necessary. In addition, make sure that the support is mating properly with the water supply nozzle.
The center wash arm circulates water to the dishes in the upper rack. If water can’t flow properly through the center wash arm, the dishes in the upper rack won’t be cleaned properly. Over time, food particles can get trapped in the tiny holes in the wash arm. If your dishes are coming out dirty, the wash arm might be clogged. To unclog the center wash arm, remove the wash arm and dislodge any debris from the holes. If the wash arm is extremely clogged, replace it. In addition, make sure that the center wash arm assembly is mating properly with the water supply nozzle.
The lower wash arm circulates water to the dishes in the lower rack. If water can’t flow properly through the lower wash arm, the dishes in the lower rack won’t be cleaned properly. Over time, food particles can get trapped in the tiny holes in the wash arm. If your dishes are coming out dirty, the wash arm might be clogged. To unclog the lower wash arm, remove the wash arm and dislodge any debris from the holes. If the wash arm is extremely clogged, replace it.