Choose Product
Identify Problem
03
Find Solutions

Frigidaire Dishwasher Not Draining? How to Drain Frigidaire Dishwasher

If your Frigidaire dishwasher is not draining, start with the most common cause: clogged sump filters. A blocked coarse filter or fine filter in the sump can restrict water flow and leave you with dishwasher standing water at the bottom of the tub. If the filters are clear, the next likely problem is a bad drain pump. When the drain pump motor fails, the dishwasher water is not draining through the drain hose as it should. After that, check the control board, since a faulty board may not send power to the pump. Less common but still possible causes include a damaged drain impeller, a failed drain solenoid kit, or a clogged or defective drain valve. These are all common reasons for a Frigidaire dishwasher not draining or a dishwasher clogged drain condition. If you are tracking down why your dishwasher drain pump is not working, enter your model number on RepairClinic.com to find the exact Frigidaire replacement part for your machine, whether you need a sump filter, drain pump, control board, drain impeller, drain solenoid kit, or drain valve.

01 - Clogged Sump Filters

The sump assembly, located at the bottom of the dishwasher tub, contains the pump motor or motors to both circulate and drain the water. There are usually two filters in this assembly to strain food particles: a course filter and a fine filter. If the filters are clogged, the unit will get low water flow and poor washability. To clean filters, remove them from the sump and wash them with soap, warm water, and brush. If the filters are damaged, they should be replaced.
Top Solution

02 - Frigidaire Dishwasher Drain Pump

The drain pump uses an impeller to force water through the drain hose. If the drain pump motor is not working, the dishwasher won’t drain. To determine if the drain pump is defective, check the pump motor for continuity using a multimeter. If the motor does not have continuity, or if is getting power but won’t run, replace the drain pump. Drain pumps are not repairable—if the drain pump is defective, you must replace it.
Enter model number to search for the required part specific to your product
Top Solution

03 - Frigidaire Dishwasher Control Board

A dishwasher's control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the drain pump, preventing it from drawing the water out of the tank and forcing it through the drain hose to the garbage disposal or sink drain pipe.
Top Solution

04 - Frigidaire Dishwasher Drain Impeller

The drain impeller pushes water through the drain hose and into the garbage disposer or drain line. If the impeller is broken, replace it.
Top Solution

05 - Frigidaire Dishwasher Drain Solenoid Kit

The drain solenoid opens the drain valve to allow the water to exit the dishwasher. If the drain solenoid fails the valve will not open causing the dishwasher not to drain.
Top Solution

06 - Frigidaire Dishwasher Drain Valve

Over time, the drain valve can get clogged with debris. To ensure that water can flow through the drain valve, clean out the valve. If the drain valve is clear of debris but it still won’t actuate, replace it. Drain valves are not repairable—if the drain valve is defective, you must replace it.
Top Solution

Frequently Asked Questions

Why is my Frigidaire dishwasher not draining and leaving standing water in the bottom?
How do I know if the Frigidaire dishwasher drain pump is bad?
Can a clogged drain valve or broken drain impeller keep a Frigidaire dishwasher from draining?
Should I replace the control board if my Frigidaire dishwasher water is not draining?
How do I find the right Frigidaire dishwasher drain pump or drain valve part?

Shop by Frigidaire Dishwasher Parts