Choose Product
Identify Problem
03
Find Solutions

Asko Dishwasher lights flashing or blinking

If your Asko dishwasher lights are flashing or blinking, the machine is usually telling you a key component is not doing its job. The most common cause is a failed heating element, followed by a bad heating element assembly, since the control panel can trigger flashing lights when the water does not reach the proper temperature in time. Next, check the water inlet valve, which can cause dishwasher flashing error lights if the tub is not filling correctly, and then the door latch, where a failed micro switch can make an Asko dishwasher blink and not start or interrupt normal operation. Less often, the problem is in the control board or main control board, especially if the dishwasher lights keep blinking unexpectedly or fault codes point to a power or communication issue. Testing parts like the heating element, water inlet valve solenoids, and door latch switch with a multimeter can help narrow it down before you order. Enter your Asko dishwasher model number on RepairClinic.com to find the exact replacement part that fits your machine, whether you need a heating element, water inlet valve, door latch, control board, or main control board.

01 - Asko Dishwasher Heating Element

The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Asko Dishwasher Heating Element Assembly

The heating element assembly heats up the water to operating temperature. If the water doesn’t reach the correct temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element assembly has burned out, use a multimeter to test the heating element for continuity.
Top Solution

03 - Asko Dishwasher Water Inlet Valve

If the dishwasher lights are flashing or blinking, the cause could be a faulty water inlet valve. You can use a multimeter to test the valve's solenoids for electrical continuity to help determine if the component is functioning properly or not.
Highly Likely

04 - Asko Dishwasher Door Latch

A dishwasher's lights flashing or blinking could indicate a problem with a micro switch inside the door latch assembly. To determine if the micro switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it or the entire latch assembly.
Highly Likely

05 - Asko Dishwasher Control Board

The control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink unexpectedly. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the control board is at fault and will need to be replaced.
Common

06 - Asko Dishwasher Main Control Board

The main control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the main control board is at fault and will need to be replaced.
Common

Frequently Asked Questions

Why are my Asko dishwasher lights flashing or blinking?
How do I tell if the heating element is causing my Asko dishwasher to blink?
Can a bad water inlet valve make my Asko dishwasher lights blink and not run properly?
Will a faulty door latch or door switch cause an Asko dishwasher to blink and not start?
How do I find the right Asko dishwasher part for flashing lights?