Choose Product
Identify Problem
03
Find Solutions

Frigidaire Dishwasher lights flashing or blinking

If your Frigidaire dishwasher lights are flashing or blinking, the machine is usually telling you a key component is not working the way it should. On this symptom, the most common cause is a failed heating element or heating element assembly, since the control panel may start flashing when the water does not reach the right temperature in time. Next, check the water inlet valve, which can trigger dishwasher flashing error lights if the valve solenoids are faulty and the unit is not filling correctly. A bad door latch or door switch microswitch is another likely cause, because the dishwasher may read the door as unsafe to run. If those parts check out, the problem may be in the control board or main control board, especially if your Frigidaire dishwasher is blinking and not starting or the lights are flashing unexpectedly without another clear failure. Testing these parts with a multimeter can narrow it down fast. Enter your model number on RepairClinic.com to find the exact Frigidaire replacement part that fits your specific dishwasher.

01 - Frigidaire Dishwasher Heating Element

The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Frigidaire Dishwasher Heating Element Assembly

The heating element assembly heats up the water to operating temperature. If the water doesn’t reach the correct temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element assembly has burned out, use a multimeter to test the heating element for continuity.
Top Solution

03 - Frigidaire Dishwasher Water Inlet Valve

If the dishwasher lights are flashing or blinking, the cause could be a faulty water inlet valve. You can use a multimeter to test the valve's solenoids for electrical continuity to help determine if the component is functioning properly or not.
Highly Likely

04 - Frigidaire Dishwasher Door Latch

A dishwasher's lights flashing or blinking could indicate a problem with a micro switch inside the door latch assembly. To determine if the micro switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it or the entire latch assembly.
Highly Likely

05 - Frigidaire Dishwasher Control Board

The control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink unexpectedly. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the control board is at fault and will need to be replaced.
Common

06 - Frigidaire Dishwasher Main Control Board

The main control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the main control board is at fault and will need to be replaced.
Common

Frequently Asked Questions

Why are my Frigidaire dishwasher lights flashing or blinking?
Can a bad heating element cause my Frigidaire dishwasher to blink and not start or finish?
How do I know if the door latch is causing my Frigidaire dishwasher lights to flash?
Will a faulty water inlet valve make a Frigidaire dishwasher flash error lights?
How do I find the right Frigidaire dishwasher part for flashing lights?

Shop by Frigidaire Dishwasher Parts