Choose Product
Identify Problem
03
Find Solutions

Danby Dishwasher lights flashing or blinking

If your Danby dishwasher lights are flashing or blinking, the machine is usually telling you a key part is not doing its job. On this symptom, the most common cause is a failed heating element or heating element assembly that is not bringing the water up to temperature in time. After that, check the water inlet valve, since restricted or failed water flow can also trigger dishwasher lights flashing. A bad door latch or failed micro switch inside the latch assembly is another likely reason, especially if the dishwasher blinking and not starting or stopping because the control does not sense the door is secured. If those parts test good, the problem may be in the control board or main control board, which can cause dishwasher flashing error lights when power is not being sent correctly to other components. Use a multimeter to check continuity where appropriate, and match any fault codes to your owner’s manual. To get the exact Danby replacement part for your dishwasher, enter your model number on RepairClinic.com and find the right heating element, water inlet valve, door latch, or control board for your specific machine.

01 - Danby Dishwasher Heating Element

The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Danby Dishwasher Heating Element Assembly

The heating element assembly heats up the water to operating temperature. If the water doesn’t reach the correct temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element assembly has burned out, use a multimeter to test the heating element for continuity.
Top Solution

03 - Danby Dishwasher Water Inlet Valve

If the dishwasher lights are flashing or blinking, the cause could be a faulty water inlet valve. You can use a multimeter to test the valve's solenoids for electrical continuity to help determine if the component is functioning properly or not.
Highly Likely

04 - Danby Dishwasher Door Latch

A dishwasher's lights flashing or blinking could indicate a problem with a micro switch inside the door latch assembly. To determine if the micro switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it or the entire latch assembly.
Highly Likely

05 - Danby Dishwasher Control Board

The control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink unexpectedly. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the control board is at fault and will need to be replaced.
Common

06 - Danby Dishwasher Main Control Board

The main control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the main control board is at fault and will need to be replaced.
Common

Frequently Asked Questions

Why are my Danby dishwasher lights flashing or blinking?
How do I test the heating element if my Danby dishwasher is blinking and not starting properly?
Can a bad door latch cause Danby dishwasher lights to blink?
Could a faulty water inlet valve make my Danby dishwasher lights flash?
How do I find the right Danby dishwasher part for flashing lights at RepairClinic.com?