Choose Product
Identify Problem
03
Find Solutions

Ikea Dishwasher lights flashing or blinking

If your Ikea dishwasher lights flashing or blinking has stopped the cycle or left you guessing, start with the parts most likely to trigger that warning. On many Ikea models, dishwasher lights blinking can point to a failed heating element or heating element assembly when the water is not reaching the proper temperature in time. Next most likely is a bad water inlet valve that is not letting the machine fill correctly, followed by a door latch with a failed micro switch that can interrupt operation and cause the control panel to react. If those check out, the problem may be in the control board or main control board, especially if the dishwasher flashing error lights show up with no obvious mechanical failure. Checking the owner’s manual for fault codes and testing components with a multimeter can help narrow it down fast. If your dishwasher blinking and not starting or showing dishwasher lights flashing during a cycle, enter your model number on RepairClinic.com to find the exact Ikea replacement part that fits your dishwasher.

01 - Ikea Dishwasher Heating Element

The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Ikea Dishwasher Heating Element Assembly

The heating element assembly heats up the water to operating temperature. If the water doesn’t reach the correct temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element assembly has burned out, use a multimeter to test the heating element for continuity.
Top Solution

03 - Ikea Dishwasher Water Inlet Valve

If the dishwasher lights are flashing or blinking, the cause could be a faulty water inlet valve. You can use a multimeter to test the valve's solenoids for electrical continuity to help determine if the component is functioning properly or not.
Highly Likely

04 - Ikea Dishwasher Door Latch

A dishwasher's lights flashing or blinking could indicate a problem with a micro switch inside the door latch assembly. To determine if the micro switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it or the entire latch assembly.
Highly Likely

05 - Ikea Dishwasher Control Board

The control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink unexpectedly. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the control board is at fault and will need to be replaced.
Common

06 - Ikea Dishwasher Main Control Board

The main control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the main control board is at fault and will need to be replaced.
Common

Frequently Asked Questions

Why are my Ikea dishwasher lights flashing or blinking?
Can a bad heating element cause my Ikea dishwasher to blink and not start or finish?
How do I know if the water inlet valve is causing my Ikea dishwasher flashing lights?
Could a door latch problem make my Ikea dishwasher lights blink?
How do I find the right Ikea dishwasher part for flashing lights on RepairClinic.com?

Shop by Ikea Dishwasher Parts