Modern Maid Dishwasher lights flashing or blinking
If your Modern Maid dishwasher lights are flashing or blinking, the machine is usually telling you a key component is not doing its job. The most common cause is a failed heating element or heating element assembly, which keeps the water from reaching the right temperature within the expected time. A faulty water inlet valve is another likely issue, since poor water flow can also trigger dishwasher flashing error lights. Next, check the door latch and its micro switch, because a bad latch can make a Modern Maid dishwasher blink and not start or continue normally. If those parts test good, the problem may be in the control board or main control board, especially if the dishwasher lights keep blinking without a clear mechanical failure. Testing parts like the heating element, water inlet valve, and door latch with a multimeter can help narrow it down quickly. To find the exact replacement part for your specific Modern Maid dishwasher, enter your model number on RepairClinic.com and match your machine with the right heating element assembly, door latch, water inlet valve, control board, or main control board.
01 - Modern Maid Dishwasher Heating Element
The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.
Enter model number to search for the required part specific to your product
02 - Modern Maid Dishwasher Heating Element Assembly
The heating element assembly heats up the water to operating temperature. If the water doesn’t reach the correct temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element assembly has burned out, use a multimeter to test the heating element for continuity.
If the dishwasher lights are flashing or blinking, the cause could be a faulty water inlet valve. You can use a multimeter to test the valve's solenoids for electrical continuity to help determine if the component is functioning properly or not.
A dishwasher's lights flashing or blinking could indicate a problem with a micro switch inside the door latch assembly. To determine if the micro switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it or the entire latch assembly.
The control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink unexpectedly. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the control board is at fault and will need to be replaced.
The main control board provides power to nearly every component of the dishwasher. It's possible that the board has shorted and is causing the lights to flash or blink. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it's likely the main control board is at fault and will need to be replaced.