Choose Product
Identify Problem
03
Find Solutions

Inglis Dishwasher won't start

If your Inglis dishwasher won't start, the most common causes are a blown thermal fuse, a failed door switch, or a damaged wire harness that is not sending power where it needs to go. A bad door latch is next on the list, since the dishwasher must latch shut before the cycle can begin. After that, the main control board can be the problem, though control boards are often misdiagnosed, so it makes sense to rule out the simpler parts first. On some Inglis models, a drain pump that cannot clear water before the fill cycle can also keep the dishwasher from starting. If your dishwasher has power but will not start, or the start button seems to work but nothing happens, checking these parts in order can save time and money. RepairClinic.com makes it easier to match the symptom to the right fix, and you can enter your model number to find the exact Inglis replacement part for your dishwasher, including a thermal fuse, door switch, wire harness, door latch, main control board, or drain pump.

01 - Inglis Dishwasher Thermal Fuse

The thermal fuse shuts off power to the dishwasher if it overheats. If the thermal fuse blows, it will prevent the dishwasher from starting. To determine if the thermal fuse is defective, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Inglis Dishwasher Door Switch

The door switch prevents the dishwasher from running while the door is open. If the door switch is defective, the switch will prevent the dishwasher from running even when the door is closed. To determine if the door switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it.
Top Solution

03 - Inglis Dishwasher Wire Harness

If the dishwasher start button appears to work, but the dishwasher still won't start, a wire harness which sends power from the control board to the pump components could be damaged. Inspect the wire harness for any frayed or broken wires and replace if necessary.
Top Solution

04 - Inglis Dishwasher Door Latch

The door latch ensures that the dishwasher door latches shut. If the door does not latch properly, the door switch might prevent the dishwasher from running. If the door latch is broken, replace it.
Highly Likely

05 - Inglis Dishwasher Main Control Board

The main control board provides power to nearly every component of the dishwasher. If there is a problem with the main control board, it might not send voltage to the dishwasher, causing the dishwasher not to start. Control boards are often misdiagnosed—make sure you check more commonly defective parts before replacing the main control board.
Highly Likely

06 - Inglis Dishwasher Drain Pump

A dishwasher drain pump assists in removing the water from the tank at various times during operation. Since the unit will drain some water from the tank prior to the fill cycle beginning, a faulty drain pump unable to drain any water could prevent the dishwasher from starting.
Highly Likely

Frequently Asked Questions

Why won't my Inglis dishwasher start even though it has power?
How do I know if the door latch or door switch is keeping my Inglis dishwasher from starting?
Can a blown thermal fuse keep an Inglis dishwasher from starting?
Can a bad drain pump cause an Inglis dishwasher not to start?
How do I find the right replacement part for my Inglis dishwasher?

Shop by Inglis Dishwasher Parts