Choose Product
Identify Problem
03
Find Solutions

Electrolux Dishwasher won't latch

If your Electrolux dishwasher won't latch, the problem is usually mechanical, not complicated. Start with the door hinge, since a bent or broken hinge can keep the door from lining up with the latch. Next, check the door seal or gasket to make sure it is fully seated and not warped or misaligned, because even a small obstruction can keep an Electrolux dishwasher door from latching. A worn door spring or door cable is also a common cause, especially if the door feels heavy or drops open too fast, which can put extra strain on the hinge and lead to a dishwasher door latch not catching. If those parts look good, inspect the door latch itself and the door strike for cracks, wear, or other damage. On this Electrolux dishwasher door won't latch page, you can troubleshoot the most likely causes in the right order and replace the failed part with confidence. Enter your model number on RepairClinic.com to find the exact Electrolux door hinge, door seal, door spring, door cable, door latch, or door strike that fits your specific dishwasher.

01 - Electrolux Dishwasher Door Hinge

If the door hinges are damaged, the door won’t be able to latch properly. Inspect the door hinges for damage. If a hinge is bent or broken, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Electrolux Dishwasher Door Seal

A dishwasher door having trouble latching could be caused by a damaged or misaligned door seak. Confirm the seal is fully seated in its track and replace if necessary.
Highly Likely

03 - Electrolux Dishwasher Door Spring

A dishwasher door spring is attached to a cable to prevent the door from dropping down when opened and to allow the door to be more easily closed and latched. If the door feels heavy when opened or falls quickly, a broken door spring or cable is likely the cause. If the damaged component is not replaced, the strain on the door hinge can lead to hinge failure which can result in the door not latching properly. It is recommended to replace both door springs at the same time to reduce uneven wear.
Highly Likely

04 - Electrolux Dishwasher Door Latch

Inspect the door latch assembly for damage. If the door latch is broken, replace it. The door latch is not repairable—if it is broken, you must replace it.
Highly Likely

05 - Electrolux Dishwasher Door Cable

A dishwasher door cable is attached to a spring to prevent the door from dropping down when opened and to allow the door to be more easily closed and latched. If the door feels heavy when opened or falls quickly, a broken door cable or spring is likely the cause. If the damaged component is not replaced, the strain on the door hinge can lead to hinge failure which can result in the door not latching properly. It is recommended to replace both door cables at the same time to reduce uneven wear.
Highly Likely

06 - Electrolux Dishwasher Door Strike

Inspect the door strike assembly for damage. If the door strike is broken, replace it. The door strike is not repairable—if it is broken, you must replace it.
Highly Likely

Frequently Asked Questions

Why won't my Electrolux dishwasher door latch?
How do I tell if the door latch or the door strike is bad on my Electrolux dishwasher?
Why does my Electrolux dishwasher door feel heavy and not catch when I close it?
Can a bad door seal keep an Electrolux dishwasher door from latching?
How do I find the right Electrolux dishwasher latch, hinge, spring, or door cable for my model?

Shop by Electrolux Dishwasher Parts