If your LG dishwasher won’t latch, start with the parts most likely to keep the door from lining up and catching properly. A damaged door hinge is the top suspect, since even a slight bend can prevent the door latch from engaging. Next, check the door seal to make sure it is seated correctly and not twisted or swollen, because a misaligned seal can keep the door from closing fully. If the door feels heavy or drops fast when opened, a worn door spring or broken door cable is also a common cause and can put extra strain on the hinge over time. After that, inspect the door latch and door strike for cracks, wear, or obvious damage, since either part can cause an LG dishwasher door won’t latch problem. If your LG dishwasher door won’t latch or the latch is not catching, entering your model number on RepairClinic.com is the fastest way to find the exact hinge, door seal, door spring, door cable, door latch, or door strike that fits your specific dishwasher.
01 - LG Dishwasher Door Hinge
If the door hinges are damaged, the door won’t be able to latch properly. Inspect the door hinges for damage. If a hinge is bent or broken, replace it.
Enter model number to search for the required part specific to your product
A dishwasher door having trouble latching could be caused by a damaged or misaligned door seak. Confirm the seal is fully seated in its track and replace if necessary.
A dishwasher door spring is attached to a cable to prevent the door from dropping down when opened and to allow the door to be more easily closed and latched. If the door feels heavy when opened or falls quickly, a broken door spring or cable is likely the cause. If the damaged component is not replaced, the strain on the door hinge can lead to hinge failure which can result in the door not latching properly. It is recommended to replace both door springs at the same time to reduce uneven wear.
Inspect the door latch assembly for damage. If the door latch is broken, replace it. The door latch is not repairable—if it is broken, you must replace it.
A dishwasher door cable is attached to a spring to prevent the door from dropping down when opened and to allow the door to be more easily closed and latched. If the door feels heavy when opened or falls quickly, a broken door cable or spring is likely the cause. If the damaged component is not replaced, the strain on the door hinge can lead to hinge failure which can result in the door not latching properly. It is recommended to replace both door cables at the same time to reduce uneven wear.
Inspect the door strike assembly for damage. If the door strike is broken, replace it. The door strike is not repairable—if it is broken, you must replace it.