Choose Product
Identify Problem
03
Find Solutions

Danby Dishwasher won't latch

If your Danby dishwasher door won’t latch, start with the parts most likely to throw the door out of position. A damaged door hinge is the top cause, since even a slightly bent hinge can keep the door from lining up and catching properly. Next, check the door seal or gasket to make sure it is fully seated and not bunched up, torn, or misaligned, because a bad seal can keep the door from closing far enough to latch. If the door feels heavy or drops open too fast, inspect the door spring and door cable, as either one can put extra strain on the hinge and lead to a dishwasher door won’t latch problem. Then look closely at the door latch and door strike for cracks, wear, or obvious damage, since either part can stop the latch from catching. Whether your dishwasher won’t latch, the dishwasher door won’t latch, or the latch is not catching, entering your Danby model number on RepairClinic.com will help you find the exact replacement hinge, seal, spring, cable, latch, or strike that fits your specific dishwasher.

01 - Danby Dishwasher Door Hinge

If the door hinges are damaged, the door won’t be able to latch properly. Inspect the door hinges for damage. If a hinge is bent or broken, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Danby Dishwasher Door Seal

A dishwasher door having trouble latching could be caused by a damaged or misaligned door seak. Confirm the seal is fully seated in its track and replace if necessary.
Highly Likely

03 - Danby Dishwasher Door Spring

A dishwasher door spring is attached to a cable to prevent the door from dropping down when opened and to allow the door to be more easily closed and latched. If the door feels heavy when opened or falls quickly, a broken door spring or cable is likely the cause. If the damaged component is not replaced, the strain on the door hinge can lead to hinge failure which can result in the door not latching properly. It is recommended to replace both door springs at the same time to reduce uneven wear.
Highly Likely

04 - Danby Dishwasher Door Latch

Inspect the door latch assembly for damage. If the door latch is broken, replace it. The door latch is not repairable—if it is broken, you must replace it.
Highly Likely

05 - Danby Dishwasher Door Cable

A dishwasher door cable is attached to a spring to prevent the door from dropping down when opened and to allow the door to be more easily closed and latched. If the door feels heavy when opened or falls quickly, a broken door cable or spring is likely the cause. If the damaged component is not replaced, the strain on the door hinge can lead to hinge failure which can result in the door not latching properly. It is recommended to replace both door cables at the same time to reduce uneven wear.
Highly Likely

06 - Danby Dishwasher Door Strike

Inspect the door strike assembly for damage. If the door strike is broken, replace it. The door strike is not repairable—if it is broken, you must replace it.
Highly Likely

Frequently Asked Questions

Why won't my Danby dishwasher door latch?
How do I know if the door latch or door strike is bad on my Danby dishwasher?
Why does my Danby dishwasher door fall open and then not latch properly?
Can a damaged door seal keep a Danby dishwasher door from latching?
How do I find the right Danby dishwasher latch, hinge, spring, or door seal for my model?