Kelvinator Dishwasher dispenser not dispensing soap
If your Kelvinator dishwasher soap dispenser is not opening, start with the parts most likely to fail inside the dispenser itself. A broken dispenser lever is the most common cause, since it can keep the detergent door from opening or closing correctly. Next, check the detergent dispenser cover, detergent container, and dispenser lid for cracks, warping, or other damage that can stop the soap door from releasing during the cycle. If one internal piece is damaged and you would rather not take the dispenser apart, replacing the complete detergent dispenser is often the simplest fix. A bad control board can also prevent the dispenser from getting voltage, but that is much less common and should be checked only after the mechanical dispenser parts. For a Kelvinator dishwasher not dispensing soap, dishwasher detergent dispenser not working, or dishwasher detergent door not opening, matching the right part to your exact model matters. Enter your model number on RepairClinic.com to find the exact Kelvinator replacement part for your dishwasher and fix a dishwasher soap dispenser not opening with confidence.
01 - Kelvinator Dishwasher Dispenser Lever
If the dishwasher dispenser lever is broken, it can cause the dispenser not to open or close properly. Inspect the dispenser lever for damage. If the lever is broken, replace it.
Enter model number to search for the required part specific to your product
The control board provides power to nearly every component of the dishwasher. If there is a problem with the control board, it might not send voltage to the detergent dispenser, preventing the dispenser from opening. However, this is not likely the case. Control boards are often misdiagnosed—make sure you check more commonly defective parts before replacing the control board