Choose Product
Identify Problem
03
Find Solutions

Amana Dishwasher overheating

If your Amana dishwasher is overheating, start with the parts most likely to cause excess heat: a shorted heating element or heating element assembly. Either one can keep raising water temperature past normal operating range and lead to a dishwasher overheating problem. Next, check the high-limit thermostat, then make sure the thermostat is firmly mounted against the tub and seated correctly in its support bracket, since a loose thermostat can misread temperature and let the dishwasher get too hot. A faulty thermostat is also possible, though less common. Before replacing parts, verify your home’s hot water supply is set close to 120°F, because water that enters too hot can also make an Amana dishwasher get too hot. If you are testing components, use a multimeter to check the heating element, heating element assembly, high-limit thermostat, and thermostat for a short or continuity problem as appropriate. To find the exact replacement part for your specific Amana dishwasher, enter your model number on RepairClinic.com and match your machine with the right heating element, thermostat, or related part fast.

01 - Amana Dishwasher Heating Element

A shorted heating element may be raising the temperature of the water beyond what is normal for proper operation and causing the dishwasher to overheat. You can use a multimeter to test the heating element for a short to help determine if the component should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Amana Dishwasher Heating Element Assembly

A shorted heating element assembly may be raising the temperature of the water beyond what is normal for proper operation and causing the dishwasher to overheat. You can use a multimeter to test the assembly for a short to help determine if the component should be replaced.
Top Solution

03 - Amana Dishwasher High Limit Thermostat

The high-limit thermostat monitors the dishwasher internal temperature and shuts off the heating element if the dishwasher overheats. If the high-limit thermostat is malfunctioning, it may shut off the voltage to the heating element circuit. However, this is rarely the case. Before replacing the high limit thermostat check all the more commonly defective parts. If you have determined that all of the other components are working properly, test the thermostat by using a multimeter to test it for continuity.
Highly Likely

04 - Thermostat out of position

The thermostat should be firmly pressed against the tub. If the thermostat is loose or is not in the support bracket correctly, it will not sense the water and air temperature properly, and can cause the dishwasher to overheat.
Highly Likely

05 - Amana Dishwasher Thermostat

The thermostat monitors the dishwasher internal temperature and shuts off the heating element if the dishwasher overheats. If the thermostat is malfunctioning, it may shut off the voltage to the heating element circuit. However, this is rarely the case. Before replacing the thermostat check all the more commonly defective parts. If you have determined that all of the other components are working properly, test the thermostat by using a multimeter to check it for continuity.
Highly Likely

06 - Water supply temperature too hot

The water supply temperature may be too hot. The recommended water supply temperature for a dishwasher to clean properly is 120 degrees Fahrenheit (49 degrees Celsius). If your hot water temperature is higher, it should be turned lower for safety reasons.
Highly Likely

Frequently Asked Questions

Why is my Amana dishwasher overheating?
How do I test an Amana dishwasher heating element for an overheating problem?
Can a bad thermostat cause an Amana dishwasher to overheat?
What water temperature is too hot for an Amana dishwasher?
How do I find the right Amana dishwasher overheating part at RepairClinic.com?

Shop by Amana Dishwasher Parts