Choose Product
Identify Problem
03
Find Solutions

Electrolux Dishwasher overheating

If your Electrolux dishwasher is overheating or getting too hot, the problem is usually in the heating circuit, not the wash system. The most likely cause is a shorted heating element, followed closely by a shorted heating element assembly, either of which can drive water temperature higher than normal and lead to dishwasher overheating. After that, check the high-limit thermostat, make sure the thermostat is firmly mounted against the tub in its support bracket, and test the thermostat itself for continuity if the more common parts check out. It is also worth verifying that your home’s hot water supply is not set above the recommended 120°F, since water that is already too hot can make an Electrolux dishwasher overheat. If your dishwasher gets too hot during the cycle, a multimeter can help you confirm whether the heating element, heating element assembly, high-limit thermostat, or thermostat has failed. To make sure you get the exact replacement part for your specific dishwasher, enter your model number on RepairClinic.com before ordering.

01 - Electrolux Dishwasher Heating Element

A shorted heating element may be raising the temperature of the water beyond what is normal for proper operation and causing the dishwasher to overheat. You can use a multimeter to test the heating element for a short to help determine if the component should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Electrolux Dishwasher Heating Element Assembly

A shorted heating element assembly may be raising the temperature of the water beyond what is normal for proper operation and causing the dishwasher to overheat. You can use a multimeter to test the assembly for a short to help determine if the component should be replaced.
Top Solution

03 - Electrolux Dishwasher High Limit Thermostat

The high-limit thermostat monitors the dishwasher internal temperature and shuts off the heating element if the dishwasher overheats. If the high-limit thermostat is malfunctioning, it may shut off the voltage to the heating element circuit. However, this is rarely the case. Before replacing the high limit thermostat check all the more commonly defective parts. If you have determined that all of the other components are working properly, test the thermostat by using a multimeter to test it for continuity.
Highly Likely

04 - Thermostat out of position

The thermostat should be firmly pressed against the tub. If the thermostat is loose or is not in the support bracket correctly, it will not sense the water and air temperature properly, and can cause the dishwasher to overheat.
Highly Likely

05 - Electrolux Dishwasher Thermostat

The thermostat monitors the dishwasher internal temperature and shuts off the heating element if the dishwasher overheats. If the thermostat is malfunctioning, it may shut off the voltage to the heating element circuit. However, this is rarely the case. Before replacing the thermostat check all the more commonly defective parts. If you have determined that all of the other components are working properly, test the thermostat by using a multimeter to check it for continuity.
Highly Likely

06 - Water supply temperature too hot

The water supply temperature may be too hot. The recommended water supply temperature for a dishwasher to clean properly is 120 degrees Fahrenheit (49 degrees Celsius). If your hot water temperature is higher, it should be turned lower for safety reasons.
Highly Likely

Frequently Asked Questions

Why is my Electrolux dishwasher overheating?
How do I test an Electrolux dishwasher heating element for an overheating problem?
Can a bad thermostat or high-limit thermostat cause my Electrolux dishwasher to overheat?
Could my home water heater be making my Electrolux dishwasher overheat?
How do I find the right Electrolux dishwasher heating element or thermostat for my model?

Shop by Electrolux Dishwasher Parts