Choose Product
Identify Problem
03
Find Solutions

Magic Chef Dishwasher spray arms not spinning

If your Magic Chef dishwasher spray arms are not spinning, the usual problem is that water is not reaching the wash arms with enough force. On this model page, the most likely causes start with the control board and main control board, which power key components like the water inlet valve. If either board fails, the dishwasher may not fill properly, and the spray arm not turning issue can look like a wash system problem when it is really a power or fill problem. A faulty timer can also interrupt power to the right components at the right time, though timers are less common failures. After that, check for blocked, damaged, or misaligned wash arm supports, especially the center wash arm support, lower wash arm support, and upper wash arm support. If one of these supports is clogged or not lining up with the water supply nozzle, your dishwasher wash arm not spinning complaint makes sense because water flow to the spray arm is restricted. For the exact Magic Chef replacement part for your dishwasher spray arms not spinning problem, enter your model number on RepairClinic.com to match the right part to your machine.

01 - Magic Chef Dishwasher Control Board

A dishwasher's control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Enter model number to search for the required part specific to your product
Top Solution

02 - Magic Chef Dishwasher Main Control Board

A dishwasher's main control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Top Solution

03 - Magic Chef Dishwasher Timer

The timer allows power to flow to the proper parts at the proper times. If the timer isn’t working properly, it might not send voltage to the dishwasher, causing it not to start. Timers are often misdiagnosed—make sure you check more commonly defective parts before replacing the timer.
Top Solution

04 - Magic Chef Dishwasher Center Wash Arm Support

The center wash arm is attached to a support that is normally attached to the underside of the upper dishrack. Water flows through the support to the arm which circulates the water to the dishes in the upper rack. If the support is damaged or obstructed water may not flow properly. Inspect the support for any damage or obstruction and replace if necessary. In addition, make sure that the support is mating properly with the water supply nozzle.
Highly Likely

05 - Magic Chef Dishwasher Lower Wash Arm Support

The lower wash arm is attached to a support fastened to the sump assembly. Water flows through the support to the arm which circulates the water to the dishes in the lower dishrack. If the support is damaged or obstructed water may not flow properly. Inspect the support for any damage or obstruction and replace if necessary.
Highly Likely

06 - Magic Chef Dishwasher Upper Wash Arm Support

The upper wash arm is attached to a support that provides water to the arm to spray the dishes in the upper dishrack. If the support is damaged or obstructed water may not flow properly. Inspect the support for any damage or obstruction and replace if necessary.
Highly Likely

Frequently Asked Questions

Why are my Magic Chef dishwasher spray arms not spinning?
Can low water fill keep my Magic Chef dishwasher spray arm from turning?
How do I tell if the wash arm support is clogged or damaged?
Should I replace the control board if my Magic Chef dishwasher spray arms are not spinning?
How do I find the right Magic Chef dishwasher spray arm or support part?

Shop by Magic Chef Dishwasher Parts