Choose Product
Identify Problem
03
Find Solutions

Bosch Dishwasher won't fill

If your Bosch dishwasher won't fill, start with the parts and checks most likely to stop water from entering the tub. The most common cause is a failed or clogged water inlet valve, since the valve has to open for the dishwasher to fill with water at all. Next, check for an object stuck under the safety float in the front corner of the tub, because a blocked float can make the machine think the water level is already too high. After that, look at the main control board, confirm the water supply shut-off valve under the sink is fully on, and test the float switch for continuity. A bad control board can also keep power from reaching the inlet valve. If your Bosch dishwasher is not filling with water, has dishwasher no water, or fills slowly, these are the first components to inspect. RepairClinic.com makes it easier to match the right Bosch dishwasher water inlet valve, float switch, or control board to your machine. Enter your model number to find the exact replacement part that fits your specific dishwasher.

01 - Bosch Dishwasher Water Inlet Valve

The water inlet valve opens to allow water to enter the dishwasher. If the water valve is clogged or defective, water will not flow into the dishwasher. Water inlet valves are not repairable—if the valve is defective, you must replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Object stuck under the safety float

Some dishwashers have a safety float in the front corner of the tub to prevent the dishwasher from overfilling with water. If an object is stuck under the float, the dishwasher may not fill with water. If you find anything stuck under the float, remove it and the dishwasher should start filling properly.
Top Solution

03 - Bosch Dishwasher Main Control Board

A dishwasher's main control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Highly Likely

04 - Water supply valve turned off

You should confirm that the dishwasher's water supply shut-off valve is in the "On" or open position. The water supply shut-off valve is usually located under the sink and is connected to the hot water line.
Highly Likely

05 - Bosch Dishwasher Float Switch

The float switch is a safety designed to shut off the water inlet valve if the dishwasher is overfilling. If the float switch is defective or stuck, it might stop the dishwasher from filling correctly. You can use a multi meter to test the float switch for continuity. If the float switch is defective, replace it.
Highly Likely

06 - Bosch Dishwasher Control Board

A dishwasher's control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Common

Frequently Asked Questions

Why is my Bosch dishwasher not filling with water?
How do I know if the Bosch dishwasher water inlet valve is bad?
Can a stuck float or bad float switch keep a Bosch dishwasher from filling?
My Bosch dishwasher has power but no water. Is it the control board?
How do I find the right replacement part for my Bosch dishwasher that won't fill?

Shop by Bosch Dishwasher Parts