Choose Product
Identify Problem
03
Find Solutions

Crosley Dishwasher won't fill

If your Crosley dishwasher won't fill, start with the most likely cause: a bad water inlet valve. The water inlet valve opens to let water into the tub, and if it is clogged or failed, your dishwasher will not fill with water. Next, check for something stuck under the safety float in the front corner of the tub, since a blocked float can make the machine think the water level is already too high. After that, make sure the water supply shut-off valve under the sink is fully open. If those check out, the problem could be a failed float switch, a faulty main control board, or a bad control board that is not sending power to the inlet valve. For a Crosley dishwasher not filling with water, these are the most common causes behind a dishwasher no water complaint and are the right places to begin diagnosis. RepairClinic.com makes it easier to match the symptom to the right part, and you can enter your model number to find the exact Crosley water inlet valve, float switch, or control board that fits your specific dishwasher.

01 - Crosley Dishwasher Water Inlet Valve

The water inlet valve opens to allow water to enter the dishwasher. If the water valve is clogged or defective, water will not flow into the dishwasher. Water inlet valves are not repairable—if the valve is defective, you must replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Object stuck under the safety float

Some dishwashers have a safety float in the front corner of the tub to prevent the dishwasher from overfilling with water. If an object is stuck under the float, the dishwasher may not fill with water. If you find anything stuck under the float, remove it and the dishwasher should start filling properly.
Top Solution

03 - Crosley Dishwasher Main Control Board

A dishwasher's main control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Highly Likely

04 - Water supply valve turned off

You should confirm that the dishwasher's water supply shut-off valve is in the "On" or open position. The water supply shut-off valve is usually located under the sink and is connected to the hot water line.
Highly Likely

05 - Crosley Dishwasher Float Switch

The float switch is a safety designed to shut off the water inlet valve if the dishwasher is overfilling. If the float switch is defective or stuck, it might stop the dishwasher from filling correctly. You can use a multi meter to test the float switch for continuity. If the float switch is defective, replace it.
Highly Likely

06 - Crosley Dishwasher Control Board

A dishwasher's control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Common

Frequently Asked Questions

Why is my Crosley dishwasher not filling with water?
How do I tell if the water inlet valve is bad on my Crosley dishwasher?
Can a stuck float switch cause a Crosley dishwasher to have no water?
My Crosley dishwasher has power but will not fill. Is it the control board?
How do I find the right water inlet valve or float switch for my Crosley dishwasher?

Shop by Crosley Dishwasher Parts