Choose Product
Identify Problem
03
Find Solutions

Danby Dishwasher won't fill

If your Danby dishwasher won't fill, start with the parts and checks most likely to stop water from entering the tub. The most common cause is a bad or clogged water inlet valve, which opens to let water into the dishwasher. Next, check the safety float in the front corner of the tub since an object stuck under it can make the dishwasher think it is already full. After that, look at the main control board, make sure the water supply shut-off valve under the sink is fully on, and test the float switch for continuity. A failed control board can also keep the water inlet valve from getting power. If your Danby dishwasher is not filling with water, has no water, or fills slowly, these are the first components to inspect before moving on. RepairClinic.com makes it easier to match the right Danby dishwasher water inlet valve, float switch, or control board to your machine. Enter your model number on RepairClinic.com to find the exact replacement part that fits your specific dishwasher.

01 - Danby Dishwasher Water Inlet Valve

The water inlet valve opens to allow water to enter the dishwasher. If the water valve is clogged or defective, water will not flow into the dishwasher. Water inlet valves are not repairable—if the valve is defective, you must replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Object stuck under the safety float

Some dishwashers have a safety float in the front corner of the tub to prevent the dishwasher from overfilling with water. If an object is stuck under the float, the dishwasher may not fill with water. If you find anything stuck under the float, remove it and the dishwasher should start filling properly.
Top Solution

03 - Danby Dishwasher Main Control Board

A dishwasher's main control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Highly Likely

04 - Water supply valve turned off

You should confirm that the dishwasher's water supply shut-off valve is in the "On" or open position. The water supply shut-off valve is usually located under the sink and is connected to the hot water line.
Highly Likely

05 - Danby Dishwasher Float Switch

The float switch is a safety designed to shut off the water inlet valve if the dishwasher is overfilling. If the float switch is defective or stuck, it might stop the dishwasher from filling correctly. You can use a multi meter to test the float switch for continuity. If the float switch is defective, replace it.
Highly Likely

06 - Danby Dishwasher Control Board

A dishwasher's control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Common

Frequently Asked Questions

Why is my Danby dishwasher not filling with water?
How do I know if the water inlet valve is bad on my Danby dishwasher?
Can a stuck float or bad float switch keep a Danby dishwasher from filling?
Could a control board cause my Danby dishwasher to have power but no water?
How do I find the right Danby dishwasher part for a no-fill problem?