Choose Product
Identify Problem
03
Find Solutions

Kenmore Dishwasher won't fill

If your Kenmore dishwasher won't fill, start with the most common cause: a bad or clogged water inlet valve. When the valve cannot open, the dishwasher gets no water and the cycle cannot begin properly. Next, check the safety float in the front corner of the tub. If something is stuck underneath it, the dishwasher may think it is already full and stop filling. A faulty main control board is another likely cause if it is not sending power to the water inlet valve. You should also make sure the water supply shut-off valve under the sink is fully open, since a closed supply valve can look exactly like a dishwasher not filling with water. If those checks do not solve it, test the float switch for continuity, because a stuck or failed float switch can also prevent filling. In some cases, the control board can be the problem as well. For a Kenmore dishwasher no water issue, enter your model number on RepairClinic.com to find the exact water inlet valve, float switch, main control board, or other replacement part that fits your machine.

01 - Kenmore Dishwasher Water Inlet Valve

The water inlet valve opens to allow water to enter the dishwasher. If the water valve is clogged or defective, water will not flow into the dishwasher. Water inlet valves are not repairable—if the valve is defective, you must replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Object stuck under the safety float

Some dishwashers have a safety float in the front corner of the tub to prevent the dishwasher from overfilling with water. If an object is stuck under the float, the dishwasher may not fill with water. If you find anything stuck under the float, remove it and the dishwasher should start filling properly.
Top Solution

03 - Kenmore Dishwasher Main Control Board

A dishwasher's main control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Highly Likely

04 - Water supply valve turned off

You should confirm that the dishwasher's water supply shut-off valve is in the "On" or open position. The water supply shut-off valve is usually located under the sink and is connected to the hot water line.
Highly Likely

05 - Kenmore Dishwasher Float Switch

The float switch is a safety designed to shut off the water inlet valve if the dishwasher is overfilling. If the float switch is defective or stuck, it might stop the dishwasher from filling correctly. You can use a multi meter to test the float switch for continuity. If the float switch is defective, replace it.
Highly Likely

06 - Kenmore Dishwasher Control Board

A dishwasher's control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
Common

Frequently Asked Questions

Why is my Kenmore dishwasher not filling with water?
How do I know if the float switch is causing my Kenmore dishwasher to not fill?
Can a bad water inlet valve keep my Kenmore dishwasher from filling?
My Kenmore dishwasher has power but no water enters. Is it the control board?
How do I find the right replacement part for my Kenmore dishwasher?

Shop by Kenmore Dishwasher Parts