The water inlet valve opens to allow water to enter the dishwasher. If the water valve is clogged or defective, water will not flow into the dishwasher. Water inlet valves are not repairable—if the valve is defective, you must replace it.
Enter model number to search for the required part specific to your product
Some dishwashers have a safety float in the front corner of the tub to prevent the dishwasher from overfilling with water. If an object is stuck under the float, the dishwasher may not fill with water. If you find anything stuck under the float, remove it and the dishwasher should start filling properly.
Top Solution
03 - Tappan Dishwasher Main Control Board
A dishwasher's main control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.
You should confirm that the dishwasher's water supply shut-off valve is in the "On" or open position. The water supply shut-off valve is usually located under the sink and is connected to the hot water line.
Highly Likely
05 - Tappan Dishwasher Float Switch
The float switch is a safety designed to shut off the water inlet valve if the dishwasher is overfilling. If the float switch is defective or stuck, it might stop the dishwasher from filling correctly. You can use a multi meter to test the float switch for continuity. If the float switch is defective, replace it.
A dishwasher's control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.