If your Danby dishwasher is making noise, start with the most common causes in the pump system. A Danby dishwasher making noise often points first to a drain pump clogged with debris or a drain pump that is wearing out. Next, check the circulation pump, since worn motor bearings can cause a steady droning or humming noise during the wash cycle. After that, inspect the drain impeller, which can get damaged and create extra sound as it pushes water into the drain hose. The pump and motor assembly is another likely source, especially if the motor bearings, drain impeller, or wash impeller are failing. A damaged wash impeller can also scrape the pump housing and cause a grinding noise, and on some models you may be able to replace the impeller separately instead of the full pump and motor assembly. In some cases, the circulation and drain pump motor itself is the problem. If your dishwasher is making noise, making a loud noise, grinding noise, buzzing noise, or humming noise, enter your model number on RepairClinic.com to find the exact Danby replacement part that fits your dishwasher.
01 - Danby Dishwasher Drain Pump
First, check the drain pump to ensure that it is clear of debris. If the drain pump is clean but it is still noisy, replace it.
Enter model number to search for the required part specific to your product
The circulation pump motor has bearings that wear out over time. When the motor bearings fail, they generate a continuous drone. If the motor bearings have failed, you must replace the entire circulation pump.
Part of the pump and motor assembly (such as the motor bearings, drain impeller, or wash impeller) might be defective. Often, you can replace the pump’s individual parts. However, if you do not want to disassemble the pump to replace its parts, or if the parts are not available separately, you can replace the entire pump and motor assembly.
The wash impeller is a small plastic blade that forces water through the spray arms. If one or more of the impeller blades is broken, the dishwasher will make noise. In addition, if the impeller is damaged, warped, or bent, it can scape against the pump housing. Inspect the wash impeller for damage. If the wash impeller is damaged, replace it. On most models, you can replace the wash impeller independently of the pump and motor assembly. Search for your model number to determine if your impeller is replaceable. If the impeller cannot be replaced separately, you will have to replace the entire pump and motor assembly.
06 - Danby Dishwasher Circulation and Drain Pump Motor
The circulation pump motor has bearings that wear out over time. When the motor bearings fail, they generate a continuous drone. If the motor bearings have failed, replace the motor or replace the entire pump and motor assembly.