Choose Product
Identify Problem
03
Find Solutions

Ikea Dishwasher overflowing

If your Ikea dishwasher is overflowing, start with the most common cause: a water inlet valve that is stuck open and keeps letting water in when it should shut off. This can also show up as dishwasher overfills with water, dishwasher water level too high, or water slowly collecting in the tub even when the machine is off. Next, check the main control board or control board, since a failed board can keep sending power to the water inlet valve during the cycle. If the leak seems like an overflow but water is actually splashing out near the door, inspect the lower wash arm assembly for cracks or splits. After that, consider simple causes like using the wrong detergent or too much soap, which can create oversudsing and make the dishwasher look like it is overflowing. Finally, inspect the float switch, since a stuck or failed float switch may not stop the fill at the right level. Enter your model number on RepairClinic.com to find the exact Ikea water inlet valve, main control board, control board, lower wash arm assembly, or float switch that fits your dishwasher.

01 - Ikea Dishwasher Water Inlet Valve

The water inlet valve is an electrically-controlled valve that opens to allow water to enter the dishwasher. Depending on the model, the valve stays open either for a set length of time or until the dishwasher has enough water. However, if the water inlet valve doesn’t shut off after the dishwasher has enough water, the dishwasher will overflow. If water drips into the dishwasher when the door is open, or if water collects at the bottom of the dishwasher while it is not use, you may need to replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution

02 - Ikea Dishwasher Main Control Board

A dishwasher's main control board provides power to nearly every electrical component in the dishwasher. If the control board continues to send power to the water inlet valve during the drain cycle, the dishwasher could overflow. While this is not that common of a problem, you can inspect the board for signs of burning or a shorted-out component. You can also use a multimeter to test the water inlet valve for incoming power during the dishwasher's cycle.
Top Solution

03 - Ikea Dishwasher Lower Wash Arm Assembly

If the lower wash arm has a crack or split on the side it can cause water to splash out the bottom of the door, giving the impression that the dishwasher is overflowing. Inspect the wash arm assembly for any damage and replace if necessary.
Top Solution

04 - Wrong type or incorrect amount of detergent

Make sure to use the proper dishwasher detergent. Use the proper amount of detergent for your water hardness; too much soap in soft water can cause oversudsing and leaking.
Common

05 - Ikea Dishwasher Control Board

A dishwasher's control board provides power to nearly every electrical component in the dishwasher. If the control board continues to send power to the water inlet valve the dishwasher could overflow. While this is not that common of a problem, you can inspect the board for signs of burning or a shorted-out component. You can also use a multimeter to test the water inlet valve for incoming power during the dishwasher's cycle.
Common

06 - Ikea Dishwasher Float Switch

The float switch actuates in order to prevent the dishwasher from overflowing. If the float switch is defective or stuck, it might not stop the dishwasher from overflowing. If the float switch is defective, replace it.
Common

Frequently Asked Questions

Why is my Ikea dishwasher overflowing with water?
My Ikea dishwasher has water collecting in the bottom when it is off. Is the water inlet valve bad?
How do I test an Ikea dishwasher float switch or water inlet valve?
Can the wrong detergent make an Ikea dishwasher look like it is overflowing?
How do I find the right overflow repair part for my Ikea dishwasher?

Shop by Ikea Dishwasher Parts