Choose Product
Identify Problem
03
Find Solutions

Electrolux Dryer leaking water

When your Electrolux dryer is leaking water, the most likely culprit is a damaged or loose fill hose that lets water pool under the machine or drip from the cabinet. Inspect the fill hose for small cracks or holes and make sure both ends are seated tightly at the inlet valve; replace the hose and install new rubber washers if needed. If water appears inside the drum, a cracked or clogged steam nozzle is a common next cause, so check the nozzle and swap it out if it shows damage. If you do not have a steam model, rule out other household sources of water before dismantling the dryer. Also inspect the steam generator housing and hose connectors, tighten or replace worn connectors and washers, and finally examine the water inlet valve for cracks in its housing. Enter your model number on RepairClinic.com to find the exact replacement part for your dryer and get clear, model-specific repair steps.

01 - Electrolux Dryer Fill Hose

A water leak that is coming from outside the dryer cabinet may be caused by a damaged fill hose. Inspect the hose for small cracks or holes and confirm the hose is secured firmly to the inlet valve. A damaged hose will need to be replaced with a new one. If needed, install new rubber washers at the ends of the hose for a water tight seal.
Enter model number to search for the required part specific to your product
Top Solution

02 - Electrolux Dryer Nozzle

A water leak inside the dryer drum may be caused by a faulty nozzle, the component used to spray the hot mist. Inspect the nozzle for any cracks or signs of visible damage and replace the old nozzle with a new one if required.
Highly Likely

03 - Check for other sources of leaks

A non steam dryer is not connected to water and will not cause a leak. Look for other sources of leaks.
Common

04 - Electrolux Dryer Steam Generator

A water leak inside the dryer drum may be caused by a faulty or damaged steam generator, the component that converts the incoming water supply to steam. Inspect the steam generator for any cracks in the housing and replace if visibly damaged.
Common

05 - Loose hose connector

Check and tighten hose connections. Install new rubber washers if needed.
Common

06 - Electrolux Dryer Water Inlet Valve

A water leak that is coming from inside the dryer cabinet is likely caused by a damaged water inlet valve. Inspect the valve for any cracks in the housing and confirm the valve hoses are secured firmly to the valve and are in good condition. If the inlet valve's housing is cracked or damaged, the component should be replaced with a new one.
Less Common

Frequently Asked Questions

Why is my Electrolux dryer leaking water from underneath?
My steam dryer is leaking water inside the drum — could the nozzle or steam generator be bad?
How can I tell if the water is coming from the dryer or somewhere else?
Will tightening a hose connector or replacing rubber washers fix a leak?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?

Shop by Electrolux Dryer Parts