If your dryer is leaking water, the usual suspects are a cracked or loose fill hose, a damaged steam nozzle inside the drum, or an unrelated household leak that only looks like it came from the dryer. Start by checking the fill hose and its washers where it connects to the inlet valve; small cracks or a loose connection will leak water outside the cabinet and the hose should be replaced and resealed. If the leak is inside the drum, inspect the steam nozzle for cracks and the steam generator housing for damage, and replace either part if you see visible breaks. Also tighten hose connectors and replace worn rubber washers, and confirm your model actually uses steam—nonsteam dryers are not tied to the water supply so look for other sources of moisture. A cracked water inlet valve housing is less common but will leak inside the cabinet, so inspect and replace it if damaged. Enter your model number on RepairClinic.com to find the exact replacement part for your dryer and get step by step guidance.
01 - Kenmore Dryer Fill Hose
A water leak that is coming from outside the dryer cabinet may be caused by a damaged fill hose. Inspect the hose for small cracks or holes and confirm the hose is secured firmly to the inlet valve. A damaged hose will need to be replaced with a new one. If needed, install new rubber washers at the ends of the hose for a water tight seal.
Enter model number to search for the required part specific to your product
A water leak inside the dryer drum may be caused by a faulty nozzle, the component used to spray the hot mist. Inspect the nozzle for any cracks or signs of visible damage and replace the old nozzle with a new one if required.
A non steam dryer is not connected to water and will not cause a leak. Look for other sources of leaks.
Common
04 - Kenmore Dryer Steam Generator
A water leak inside the dryer drum may be caused by a faulty or damaged steam generator, the component that converts the incoming water supply to steam. Inspect the steam generator for any cracks in the housing and replace if visibly damaged.
Check and tighten hose connections. Install new rubber washers if needed.
Common
06 - Kenmore Dryer Water Inlet Valve
A water leak that is coming from inside the dryer cabinet is likely caused by a damaged water inlet valve. Inspect the valve for any cracks in the housing and confirm the valve hoses are secured firmly to the valve and are in good condition. If the inlet valve's housing is cracked or damaged, the component should be replaced with a new one.