Choose Product
Identify Problem
03
Find Solutions

Speed Queen Dryer leaking water

If your Speed Queen dryer is leaking water, start with the most likely cause: a damaged fill hose or loose hose connection. A cracked or punctured fill hose will drip outside the cabinet and often needs replacement, and installing new rubber washers at the ends will restore a watertight seal. If the leak is inside the drum, check the steam nozzle next; a cracked or clogged nozzle that sprays the hot mist can leak into the tub. Also confirm the unit is a steam model before assuming the dryer is the source, since non steam dryers are not connected to water and the leak may come from plumbing nearby. If the nozzle and hoses look good, inspect the steam generator for housing cracks and the water inlet valve for damage or loose fittings. Tightening connectors or replacing a faulty inlet valve will stop leaks that originate inside the cabinet. For the exact replacement parts you need, enter your model number on RepairClinic.com to see parts that fit your Speed Queen dryer.

01 - Speed Queen Dryer Fill Hose

A water leak that is coming from outside the dryer cabinet may be caused by a damaged fill hose. Inspect the hose for small cracks or holes and confirm the hose is secured firmly to the inlet valve. A damaged hose will need to be replaced with a new one. If needed, install new rubber washers at the ends of the hose for a water tight seal.
Enter model number to search for the required part specific to your product
Top Solution

02 - Speed Queen Dryer Nozzle

A water leak inside the dryer drum may be caused by a faulty nozzle, the component used to spray the hot mist. Inspect the nozzle for any cracks or signs of visible damage and replace the old nozzle with a new one if required.
Highly Likely

03 - Check for other sources of leaks

A non steam dryer is not connected to water and will not cause a leak. Look for other sources of leaks.
Common

04 - Speed Queen Dryer Steam Generator

A water leak inside the dryer drum may be caused by a faulty or damaged steam generator, the component that converts the incoming water supply to steam. Inspect the steam generator for any cracks in the housing and replace if visibly damaged.
Common

05 - Loose hose connector

Check and tighten hose connections. Install new rubber washers if needed.
Common

06 - Speed Queen Dryer Water Inlet Valve

A water leak that is coming from inside the dryer cabinet is likely caused by a damaged water inlet valve. Inspect the valve for any cracks in the housing and confirm the valve hoses are secured firmly to the valve and are in good condition. If the inlet valve's housing is cracked or damaged, the component should be replaced with a new one.
Less Common

Frequently Asked Questions

Why is my Speed Queen dryer leaking water from the outside?
Why is water pooling inside the dryer drum?
How can I tell whether the leak is coming from the hose, a connector, or the inlet valve?
My dryer is leaking underneath. Could worn rubber washers or a loose connector cause that?
How do I enter my model number or part number on RepairClinic.com to buy the correct replacement part?

Shop by Speed Queen Dryer Parts