If the interior light in your Norge dryer is out, you can usually track it down without calling a tech. Start by checking the light socket first; a bad socket is the most common fix and you can use a multimeter to see if voltage is reaching the socket. If the socket has power but no light, the control electronics are the next suspects because indicator lights live on assemblies that are not serviced separately. That means a faulty control panel, touchpad or user control and display board can cause the light to fail, and those assemblies are replaced as units. Less commonly a defective door switch will stop voltage from reaching the bulb, so test the switch for continuity while actuating it. Finally, inspect the light assembly and bulb for visible damage or burn marks and replace if needed. If you need parts, enter your model number on RepairClinic.com to find the exact replacement control panel, socket, switch or light assembly that fits your dryer.
01 - Norge Dryer Light Socket
If the light itself is newly installed or shows no signs of damage, yet still won't work, it's possible the light socket is defective. You can use a multimeter to test whether or not voltage is reaching the light socket. If the meter shows that power is reaching the light socket then it's likely the socket is malfunctioning and will need to be replaced.
Enter model number to search for the required part specific to your product
The dryer control panel indicator lights are part of the control panel assembly and cannot be replaced separately. If an control panel indicator light is not working, the entire control panel assembly will need to be replaced.
The dryer control panel indicator lights are part of the touchpad and control panel and cannot be replaced separately. If an control panel indicator light is not working, the entire touchpad and control panel assembly will need to be replaced.
The dryer control panel indicator lights are part of the user control and display board and cannot be replaced separately. If an control panel indicator light is not working, the user control and display board will need to be replaced.
The dryer door switch will turn the interior light off when the door is closed and turn it back on when the door is opened. If the switch is defective, it may be unable to allow voltage to reach the light. You can use a multimeter to test the door switch for appropriate electrical continuity when actuated. If the switch doesn't provide appropriate continuity, it will need to be replaced.
The most likely cause of a dryer interior light not working is a defective light assembly. Inspect the assembly for any visible damage or burn marks and replace as required.