Choose Product
Identify Problem
03
Find Solutions

Maytag Dryer light is out

Your Maytag dryer light is out because something is stopping power from reaching the bulb. The most common cause is a failed light socket; use a multimeter to check for voltage at the socket and replace it if it shows no power. If the bulb and socket test good, the next likely culprits are control assemblies, the control panel, touchpad, or user control and display board, since many indicator lights are built into those modules and must be replaced as a unit. A defective door switch can also keep the light off, so test the switch for continuity while actuating it and replace it if it fails. Less often the light assembly itself is burned or damaged and needs replacement. If the symptom involves the control lights or indicators, think of it as dryer controls not working or dryer controls not responding rather than a simple bulb failure. Enter your model number on RepairClinic.com to find the exact replacement socket, switch, or control assembly for your dryer and get clear instructions and parts to finish the repair.

01 - Maytag Dryer Light Socket

If the light itself is newly installed or shows no signs of damage, yet still won't work, it's possible the light socket is defective. You can use a multimeter to test whether or not voltage is reaching the light socket. If the meter shows that power is reaching the light socket then it's likely the socket is malfunctioning and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Maytag Dryer Control Panel

The dryer control panel indicator lights are part of the control panel assembly and cannot be replaced separately. If an control panel indicator light is not working, the entire control panel assembly will need to be replaced.
Highly Likely

03 - Maytag Dryer Touchpad and Control Panel

The dryer control panel indicator lights are part of the touchpad and control panel and cannot be replaced separately. If an control panel indicator light is not working, the entire touchpad and control panel assembly will need to be replaced.
Highly Likely

04 - Maytag Dryer User Control and Display Board

The dryer control panel indicator lights are part of the user control and display board and cannot be replaced separately. If an control panel indicator light is not working, the user control and display board will need to be replaced.
Highly Likely

05 - Maytag Dryer Door Switch

The dryer door switch will turn the interior light off when the door is closed and turn it back on when the door is opened. If the switch is defective, it may be unable to allow voltage to reach the light. You can use a multimeter to test the door switch for appropriate electrical continuity when actuated. If the switch doesn't provide appropriate continuity, it will need to be replaced.
Less Common

06 - Maytag Dryer Light Assembly

The most likely cause of a dryer interior light not working is a defective light assembly. Inspect the assembly for any visible damage or burn marks and replace as required.
Less Common

Frequently Asked Questions

Why won’t my dryer light turn on?
How do I test the dryer light socket and door switch with a multimeter?
Can the control panel or touchpad cause dryer lights to go out or flash?
Do I need to replace the light bulb or the whole light assembly?
How do I find and buy the right replacement part on RepairClinic.com?