Choose Product
Identify Problem
03
Find Solutions

Amana Dryer vibrating or shaking

A vibrating or shaking Amana dryer almost always means the drum is not rotating smoothly, and the most likely culprits are a failing drive motor or motor with worn bearings, which often cause a dryer making grinding noise or a dryer making noise when drum turns. If the motor feels rough or the shaft does not spin freely by hand, replace the motor. Next check the drum support bearing, which will make the dryer squeaking or rumbling and let the drum wobble when it wears out. Worn felt seals at the drum edges can also let the drum rub and vibrate, and a stuck or damaged idler pulley or idler assembly can prevent the belt from running true and cause a dryer making loud noise. Inspect these parts for wear, rough rotation, or damage and replace the defective component to stop the shaking. Enter your model number on RepairClinic.com to see the exact replacement part that fits your Amana dryer and get step by step guidance for the repair.

01 - Amana Dryer Drive Motor

A drive motor that is wearing out will be unable to rotate the dryer drum efficiently, resulting in the dryer vibrating or shaking during operation. As the motor bearings began to wear out, the drive motor will often make a grinding noise. If the motor is noisy or the motor shaft does not turn freely by hand, the component should be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Amana Dryer Motor

A dryer motor that is wearing out will be unable to rotate the drum efficiently, resulting in the dryer vibrating or shaking during operation. As the motor bearings began to wear out, the motor will often make a grinding noise. If the motor is noisy or the motor shaft does not turn freely by hand, the component should be replaced.
Top Solution

03 - Amana Dryer Drum Support Bearing

A worn drum support bearing will interfere with the smooth rotation of the dryer drum which can cause the appliance to vibrate or shake during operation. A support bearing the shows excessive wear or damage will need to be replaced to fix the problem.
Top Solution

04 - Amana Dryer Felt Seal

Felt seals can be found on the front or rear bulkhead of the dryer or on the front and back rims of the drum itself. A worn or missing felt seal can interfere with the dryer drum rotating smoothly, resulting in the appliance vibrating or shaking during operation. Inspect the felt seal or seals for wear or damage and replace as necessary.
Top Solution

05 - Amana Dryer Idler Pulley

A worn or stuck idler pulley may be unable to smoothly allow the drive belt to rotate the drum efficiently, resulting in the appliance vibrating or shaking. Inspect the pulley for any wear or damage and confirm it rotates freely. If the pulley shows signs of damage or doesn't turn easily it should be replaced.
Highly Likely

06 - Amana Dryer Idler Assembly

A worn or stuck idler assembly may be unable to smoothly allow the drive belt to rotate the drum efficiently, resulting in the appliance vibrating or shaking. Inspect the idler assembly for any wear or damage and confirm the pulley rotates freely. If the assembly shows signs of damage or the pulley doesn't turn easily the idler assembly should be replaced.
Highly Likely

Frequently Asked Questions

Why is my dryer vibrating and making a grinding noise?
My dryer squeaks when the drum turns. What parts should I check?
Can a bad idler pulley cause the dryer drum to stop turning or the dryer to shake?
How can I tell if the drum support bearing or felt seal needs replacing?
How do I enter my model number or part number on RepairClinic.com to find the correct replacement part?