Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpAdmiral Dryer RepairAdmiral Dryer not heating Repair
Admiral Dryer not heating
If your Admiral dryer is running but not producing heat, the most likely culprits are a blown thermal fuse, a faulty drive motor with a bad centrifugal switch, or failed gas valve solenoids on gas models. A blown thermal fuse is the top cause and often means a restricted exhaust vent, so check and clean the vent before replacing the fuse. On electric dryers a bad motor switch can let the drum spin while preventing the heat cycle from engaging. For gas dryers, a bad gas valve solenoid or a burned-out igniter will stop ignition even if the igniter glows. Also double-check that the control and cycle are set to a heating option, since incorrect settings are a common simple fix. You can test parts like the thermal fuse or igniter with a multimeter, but if you need replacements enter your model number on RepairClinic.com to find the exact part for your dryer and get step-by-step guidance for the repair.
01 - Admiral Dryer Thermal Fuse
The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good. If overheated the fuse will have no continuity meaning the electrical path is broken and the fuse has blown. A multimeter can be used to test it for continuity. Be aware that a blown thermal fuse is an indication of a restricted exhaust vent from the dryer to the outside. Always check t...
Enter model number to search for the required part specific to your product
Top Solution
02 - Admiral Dryer Drive Motor
Most dryer drive motors have a centrifugal switch that energizes a start winding when the motor is first started and closes a heat cycle contact to allow the heat source to work. If the motor's centrifugal switch is faulty, either the motor won’t run or the motor will run but the dryer won’t heat. Since most centrifugal switches are not sold separately, the entire motor will need to be replaced if the switch is defective.
Top Solution
03 - Admiral Dryer Gas Valve Solenoid
Gas dryers have two or more gas valve solenoid coils. The gas valve solenoids open the gas valve ports to allow gas to flow into the burner assembly. If a gas valve solenoid fails, the dryer won’t heat. To determine if one or more of the gas valve solenoids has failed, check the igniter. If the igniter glows and goes out but does not ignite the gas, the gas valve solenoid is defective. If one or more of the gas valve coils are defective, we recommend that you replace them as a set.
Highly Likely
04 - Incorrect cycle settings
Ensure the dryer is set to the appropriate heat setting. The setting may have been inadvertently changed to a non-heat option.
Highly Likely
05 - Incorrect cycle selected
The dryer setting may have been inadvertently changed to a non-heat option. Confirm the dryer is set to a proper heating option such as "Regular" or "Heavy" to see if that improves drying performance.
Highly Likely
06 - Admiral Dryer Igniter
The igniter uses heat to ignite the gas in the burner assembly. If the igniter is not working, the gas will not ignite, preventing the dryer from heating. To determine if the igniter has burned out, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it.
Highly Likely
Frequently Asked Questions
Dryer not heating but drum turns — what should I check first?
How do I test the thermal fuse when my dryer is not heating?
My gas dryer igniter glows but there is no flame — is the gas valve solenoid bad?
Dryer overheating and shutting off — why does this blow the thermal fuse?
How do I enter my model number or part number on RepairClinic.com to find the correct dryer part?
Shop by Admiral Dryer Parts
Shop by Popular Admiral Dryer Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com