Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeChoose Product
Identify Problem
03
Find Solutions
HomeRepair HelpNorge Dryer RepairNorge Dryer not heating Repair
Norge Dryer not heating
If your Norge dryer is running but not heating, the most likely culprit is a blown thermal fuse on the blower housing or at the heat source — a failed thermal fuse breaks continuity and usually points to a restricted exhaust vent, so check and clean the vent before replacing the fuse. Next likely is the drive motor’s centrifugal switch: the motor may spin but the switch that allows the heat circuit to close can fail, and since those switches are rarely sold separately you’ll often replace the entire motor. On gas models a failed gas valve solenoid can let the igniter glow without allowing gas to flow, so test the igniter and replace solenoids as a set if needed. Also verify the dryer’s cycle and heat settings in case it’s set to a no-heat option. Finally, a bad igniter will prevent gas ignition. You can test suspected parts with a multimeter and order exact replacement parts on RepairClinic.com by entering your model number to make sure you get the right thermal fuse, motor, igniter or gas valve parts for your dryer.
01 - Norge Dryer Thermal Fuse
The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good. If overheated the fuse will have no continuity meaning the electrical path is broken and the fuse has blown. A multimeter can be used to test it for continuity. Be aware that a blown thermal fuse is an indication of a restricted exhaust vent from the dryer to the outside. Always check t...
Enter model number to search for the required part specific to your product
Top Solution
02 - Norge Dryer Drive Motor
Most dryer drive motors have a centrifugal switch that energizes a start winding when the motor is first started and closes a heat cycle contact to allow the heat source to work. If the motor's centrifugal switch is faulty, either the motor won’t run or the motor will run but the dryer won’t heat. Since most centrifugal switches are not sold separately, the entire motor will need to be replaced if the switch is defective.
Top Solution
03 - Norge Dryer Gas Valve Solenoid
Gas dryers have two or more gas valve solenoid coils. The gas valve solenoids open the gas valve ports to allow gas to flow into the burner assembly. If a gas valve solenoid fails, the dryer won’t heat. To determine if one or more of the gas valve solenoids has failed, check the igniter. If the igniter glows and goes out but does not ignite the gas, the gas valve solenoid is defective. If one or more of the gas valve coils are defective, we recommend that you replace them as a set.
Highly Likely
04 - Incorrect cycle settings
Ensure the dryer is set to the appropriate heat setting. The setting may have been inadvertently changed to a non-heat option.
Highly Likely
05 - Incorrect cycle selected
The dryer setting may have been inadvertently changed to a non-heat option. Confirm the dryer is set to a proper heating option such as "Regular" or "Heavy" to see if that improves drying performance.
Highly Likely
06 - Norge Dryer Igniter
The igniter uses heat to ignite the gas in the burner assembly. If the igniter is not working, the gas will not ignite, preventing the dryer from heating. To determine if the igniter has burned out, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it.
Highly Likely
Frequently Asked Questions
My Norge dryer is not heating — what should I check first?
Why did my dryer overheat and now it won't heat at all?
How can I test the igniter and gas valve solenoids on a gas Norge dryer?
The motor runs but the dryer won’t heat — could the motor be the problem?
How do I find the exact replacement part for my Norge dryer on RepairClinic.com?
Shop by Norge Dryer Parts
Shop by Popular Norge Dryer Models
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com