If your Huskee lawn mower starts then stalls, the problem is usually fuel delivery, not something major. The most common cause is a clogged carburetor from old gas that has turned sticky and restricted fuel flow, which is why a lawn mower starts then dies, runs then shuts off, or only runs for a few seconds. Start by cleaning the carburetor with carburetor cleaner. If that does not restore normal operation, rebuild it with a carburetor repair kit or replace the carburetor. Next, check the fuel cap vent. A blocked fuel cap can create vapor lock in the tank and starve the carburetor, causing the mower to start and then stop. Old or bad gasoline can lead to the same stalling issue, so draining stale fuel is often part of the fix. If fuel-related parts check out, inspect the spark plug for carbon buildup, wear, or a cracked insulator, and use a spark plug tester to confirm a strong spark while cranking. Enter your Huskee model number on RepairClinic.com to find the exact carburetor, fuel cap, spark plug, or other replacement part that fits your mower.
01 - Huskee Carburetor
The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the lawn mower for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.
Enter model number to search for the required part specific to your product
The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the lawn mower for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.
As fuel is consumed by the engine, the level in the fuel tank lowers. To make up for this, the fuel cap uses a small vent to allow air to enter the tank. If the fuel cap vent is clogged, air won’t be able to enter the tank and a vacuum or “vapor lock” will occur. This stops the flow of fuel to the carburetor causing the engine to stall. To determine if the fuel cap vent is clogged, try slightly loosening the cap and then starting the engine. If loosening the fuel cap allows the engine to stay running it is likely clogged and will need to be replaced.
The carburetor might be clogged. A clogged carburetor is most commonly caused by leaving fuel in the lawn mower for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall. If the carburetor is clogged, try cleaning it with carburetor cleaner. If cleaning the carburetor isn’t effective, rebuild or replace the entire carburetor.
Top Solution
05 - Huskee Spark Plug
Inspect the spark plug for signs of wear or damage. If the porcelain insulator is cracked, an electrode is burned away or damaged, or there is heavy carbon buildup at the electrode, replace the spark plug. To determine if the spark plug is defective, use a spark plug tester. You should see a strong spark between the tester’s terminals when the engine is cranking. If there is no spark, this indicates that the spark plug is defective and should be replaced.