If your Cub Cadet lawn mower is leaking gas, start at the carburetor. The most common cause is a worn, dried out, or missing carburetor bowl gasket, especially when gas leaking from the bottom of the lawn mower seems to trace back to the carburetor bowl. Next, check the float needle, since a damaged needle can fail to shut off fuel flow and cause the carburetor to overflow. A bad carburetor gasket is another likely source of a lawn mower gas leak, followed by a cracked primer bulb that seeps fuel when pressed. If the leak is not coming from those parts, inspect the fuel shut-off solenoid, the valve, and connected fuel lines for cracks or loose fits. A stuck carburetor float can also cause a mower leaking fuel problem by letting too much gas into the float bowl. Cleaning the carburetor may free up the float, but if not, you may need a carburetor rebuild or full replacement. Enter your Cub Cadet model number on RepairClinic.com to find the exact carburetor bowl gasket, float needle, primer bulb, carburetor gasket, fuel shut-off solenoid, or other replacement part for your mower.
01 - Cub Cadet Carburetor Bowl Gasket
If the lawn mower leaks gas the carburetor bowl gasket on the bottom of the carburetor might be dried out or missing. If the leak is coming from the bottom of the carburetor, try replacing the carburetor bowl gasket.
Enter model number to search for the required part specific to your product
The float needle might not be shutting off the fuel. The float needle opens and closes the float valve to allow fuel to enter the float bowl. If the float needle is damaged, the carburetor will continue to fill with fuel until it overflows. If the float needle is defective, replace it.
Check the fuel shut-off valve for leaks, and ensure that the fuel lines fit tightly on the valve. If the fuel shut-off solenoid is leaking, replace it. In addition, inspect the fuel shut off lines for cracks or tiny holes. If a fuel shut-off line is leaking, replace it.
The float might be stuck open. If the float is stuck open, remove the carburetor assembly from the engine and clean it thoroughly. If the cleaning the carburetor is not effective, either rebuild or replace the carburetor.