Is your Dacor microwave light not working, or is the microwave light bulb burned out? The most likely cause is a failed Dacor microwave light bulb, so replace the bulb before testing other parts. Some Dacor models use a halogen lamp, which you can test for electrical continuity with a multimeter or install in an identical socket. If the lamp and light socket are working, inspect the wiring and test the main control board to confirm it sends the correct voltage to the socket. A defective door switch can also keep the light from turning on because it does not tell the control board whether the door is open or closed. If needed, test each door switch and micro switch for continuity. A less common cause is a failed control board. Enter your model number to find the exact Dacor microwave light bulb, halogen lamp, socket, door switch, micro switch, or control board for your appliance. If testing requires opening the outer cabinet, unplug the microwave first. The high-voltage capacitor can store a lethal charge even after unplugging and must be properly discharged before interior work. If you are not familiar with capacitor discharge procedures, have a qualified technician handle the repair.
01 - Dacor Microwave Light Bulb
The light bulb itself might be burned out. Replace the light bulb before replacing any of the parts associated with the light bulb
Enter model number to search for the required part specific to your product
To determine if a halogen lamp has failed, you can use a multimeter to test it for electrical continuity, or install the lamp into an identical socket to test it.
Before replacing the control, check the light bulbs, sockets, and wiring. If these parts seem to be working properly, test the control board with a multimeter to determine if it sending the correct voltage to the light bulb socket. If the control board is not sending enough voltage to the light bulb socket, replace the control board.
A defective door switch may not signal the control board that the door is open or closed which may prevent the microwave light from turning on or prevent the button that controls the light from functioning. To determine if any of the door switches are defective, use a multimeter to test each of the switches for continuity. If any of the door switches do not have continuity, the switch or switches should be replaced.
A microwave light bulb not working could be caused by a defective control board, although this is rarely the case. Before replacing the control board, check the light bulbs, sockets, and wiring. If these parts seem to be working properly, test the control board with a multimeter to determine if it sending the correct voltage to the light bulb socket. If the control board is not sending enough voltage to the light bulb socket, replace the control board.
A defective micro switch may not signal the control board that the door is open or closed which may prevent the microwave light from turning on or prevent the button that controls the light from functioning. To determine if any of the micro switches are defective, use a multimeter to test each of the switches for continuity. If any of the micro switches do not have continuity, the switch or switches should be replaced.