Choose Product
Identify Problem
03
Find Solutions

Modern Maid Microwave light bulb not working

If your Modern Maid microwave light is not working, the light bulb itself is the most likely cause. A burned-out microwave light bulb is usually the first part to replace, followed by a failed halogen lamp if your model uses one. If the new bulb or lamp still does not illuminate, inspect the light socket and wiring, then test the main control board to verify that it sends the correct voltage to the socket. A defective door switch can also prevent the light from turning on because it may not signal the control board when the door opens or closes. Less commonly, the control board or a micro switch may be faulty. Test switches for continuity with a multimeter before replacing them. Enter your Modern Maid microwave model number to find the exact light bulb, halogen lamp, socket, switch, or control board for your appliance. Replacing an accessible bulb may be straightforward, but any repair that requires opening the outer cabinet must be handled carefully. The high-voltage capacitor can store a lethal charge even after the microwave is unplugged, so it must be properly discharged before interior work. If you are not familiar with capacitor discharge procedures, use a qualified technician.

01 - Modern Maid Microwave Light Bulb

The light bulb itself might be burned out. Replace the light bulb before replacing any of the parts associated with the light bulb
Enter model number to search for the required part specific to your product
Top Solution

02 - Modern Maid Microwave Halogen Lamp

To determine if a halogen lamp has failed, you can use a multimeter to test it for electrical continuity, or install the lamp into an identical socket to test it.
Top Solution

03 - Modern Maid Microwave Main Control Board

Before replacing the control, check the light bulbs, sockets, and wiring. If these parts seem to be working properly, test the control board with a multimeter to determine if it sending the correct voltage to the light bulb socket. If the control board is not sending enough voltage to the light bulb socket, replace the control board.
Highly Likely

04 - Modern Maid Microwave Door Switch

A defective door switch may not signal the control board that the door is open or closed which may prevent the microwave light from turning on or prevent the button that controls the light from functioning. To determine if any of the door switches are defective, use a multimeter to test each of the switches for continuity. If any of the door switches do not have continuity, the switch or switches should be replaced.
Highly Likely

05 - Modern Maid Microwave Control Board

A microwave light bulb not working could be caused by a defective control board, although this is rarely the case. Before replacing the control board, check the light bulbs, sockets, and wiring. If these parts seem to be working properly, test the control board with a multimeter to determine if it sending the correct voltage to the light bulb socket. If the control board is not sending enough voltage to the light bulb socket, replace the control board.
Common

06 - Modern Maid Microwave Micro Switch

A defective micro switch may not signal the control board that the door is open or closed which may prevent the microwave light from turning on or prevent the button that controls the light from functioning. To determine if any of the micro switches are defective, use a multimeter to test each of the switches for continuity. If any of the micro switches do not have continuity, the switch or switches should be replaced.
Common

Frequently Asked Questions

Why is my Modern Maid microwave light bulb not working?
How do I test a Modern Maid microwave light bulb, socket, or door switch?
Could the control board cause my microwave light bulb to stop working?
How do I find the correct Modern Maid microwave light bulb replacement?
Is it safe to replace a Modern Maid microwave light bulb myself?

Shop by Modern Maid Microwave Parts