When your Emerson microwave display is not working, start by pressing each control-panel button. If the buttons are also unresponsive, the control module is the most likely cause and may need replacement. On models without a separate display board, a defective touchpad and control panel can cause a blank microwave screen or clock display. If only some digits or segments are missing, the display board is more commonly at fault. If the display is completely dark but the microwave has power, either the main control board or display board may be defective. Confirm the power cord is plugged in, test the wall receptacle with another small appliance, and check for a tripped circuit breaker before ordering parts. A control board that has power but does not operate the digital display may also need replacement. Enter your Emerson microwave model number to find the exact replacement control module, touchpad, main control board, or display board for your appliance. Any repair that requires opening the outer cabinet must be performed carefully because the high-voltage capacitor can store a lethal charge even after the microwave is unplugged. Proper capacitor discharge is required before interior work, so use a qualified technician if you are not familiar with that procedure.
01 - Emerson Microwave Control Module
A malfunctioning display could be caused by a defective control module. Try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is likely the control module is defective and will need to be replaced.
Enter model number to search for the required part specific to your product
If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
If the display isn’t working at all, either the main control board or the display board could be at fault. If the display goes out partially, the display board is more commonly at fault.
Confirm the microwave is plugged in and there is power at the wall receptacle. You can plug another small appliance into the receptacle to confirm there is power. If there is no power, confirm the circuit breaker has not tripped.
Highly Likely
06 - Emerson Microwave Control Board
Since the control board is a part of the digital display, a defective board could be responsible for a microwave display not working, if the control board has power to it but the display is not working replace the control board.