Choose Product
Identify Problem
03
Find Solutions

Montgomery Wards Microwave display not working

Is your Montgomery Wards microwave display not working? First check whether the control panel buttons respond. A defective control module is the most likely cause when the microwave screen is blank, the clock display is dark, or the buttons do not respond correctly. If your model does not use a separate display board, the touchpad and control panel may be faulty instead. When only part of the display is out or segments are missing, the display board is more commonly defective. If the display is completely dead, either the main control board or display board could be responsible. Also confirm the microwave has incoming power by testing the wall receptacle with another appliance and checking the circuit breaker. If the control board has power but the digital display remains off, the control board may need replacement. Enter your model number to find the exact Montgomery Wards replacement part for your specific microwave. Any repair that requires opening the outer cabinet must be handled carefully. The high-voltage capacitor can store a lethal charge even after the microwave is unplugged, so it must be properly discharged before interior work. If you are not familiar with capacitor discharge procedures, use a qualified technician.

01 - Montgomery Wards Microwave Control Module

A malfunctioning display could be caused by a defective control module. Try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is likely the control module is defective and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Montgomery Wards Microwave Touchpad and Control Panel

If the microwave does not have a separate display board, then the display not working is likely caused by a defective touchpad and control panel.
Top Solution

03 - Montgomery Wards Microwave Main Control Board

If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
Top Solution

04 - Montgomery Wards Microwave Display Board

If the display isn’t working at all, either the main control board or the display board could be at fault. If the display goes out partially, the display board is more commonly at fault.
Top Solution

05 - Incoming Power Problem

Confirm the microwave is plugged in and there is power at the wall receptacle. You can plug another small appliance into the receptacle to confirm there is power. If there is no power, confirm the circuit breaker has not tripped.
Highly Likely

06 - Montgomery Wards Microwave Control Board

Since the control board is a part of the digital display, a defective board could be responsible for a microwave display not working, if the control board has power to it but the display is not working replace the control board.
Common

Frequently Asked Questions

Why is my Montgomery Wards microwave display not working even though it has power?
What should I check if my Montgomery Wards microwave screen is blank but the buttons are unresponsive?
Why does my microwave display have missing segments or only part of the display works?
How do I find the correct Montgomery Wards microwave display board or control module?
Is it safe to repair a Montgomery Wards microwave with no display?