Is your Frigidaire microwave turning on by itself? First determine whether only the vent fan is running. On an over-the-range microwave, the vent fan may turn on automatically while stovetop cooking produces heat, then shut off after the microwave cools. If the microwave starts cooking or the touchpad is not responding correctly, the main control board is the most likely cause after confirming the touchpad works properly. A faulty interlock switch can also make the microwave turn on by itself, so test the door switches with a multimeter and replace the switch if needed. Next, inspect the switch holder behind the control panel. A damaged or misaligned holder may prevent the interlock switches from engaging correctly. Less commonly, the touchpad and control panel circuits may intermittently contact each other, requiring replacement of the touchpad and control panel or the touchpad alone. Enter your Frigidaire microwave model number to find the exact replacement part for your appliance. Any repair that requires opening the outer cabinet must be handled carefully because the high-voltage capacitor can store a lethal charge even when unplugged. Proper capacitor discharge is required before interior work, and a qualified technician should perform the repair if you are not familiar with that procedure.
01 - Frigidaire Microwave Main Control Board
First, make sure that the touchpad is working properly. If the touchpad is working properly, the main control board is likely at fault. If the control board is defective, replace it.
Enter model number to search for the required part specific to your product
02 - Microwave cooling down during stovetop cooking
Most over-the-range microwaves have a vent fan thermostat that will turn the vent fan on automatically to keep the microwave from overheating. The fan will shut off after the microwave cools back down.
Highly Likely
03 - Frigidaire Microwave Interlock Switch
A microwave that turns on by itself can be caused by a malfunctioning interlock switch. You can use a multimeter to test the interlock switches to determine if they are functioning appropriately and replace if necessary.
The microwave switch holder is the component that houses the door switches behind the control panel. If the switch holder is damaged or misaligned, the switches may not be properly engaged which could cause the microwave to turn on by itself. You will need to uninstall the control panel and inspect the switch holder to confirm it is in good condition and secured properly. Replace the switch holder with a new one if necessary.
05 - Frigidaire Microwave Touchpad and Control Panel
It’s possible that the touchpad and control panel button circuits are coming into contact with each other intermittently which could cause the microwave to turn on by itself. If this happens, the touchpad and control panel will need to be replaced.
It’s possible that the touchpad button circuits are coming into contact with each other intermittently which could cause the microwave to turn on by itself. If this happens, the touchpad will need to be replaced.