Choose Product
Identify Problem
03
Find Solutions

Kenmore Microwave shuts off after a few seconds

01 - Kenmore Oven/Microwave Combo Door Switch

A door switch might be failing intermittently. Check each of the door switches for signs of overheating, arcing, or burning. If you don’t see any obvious signs of failure, use a multimeter to test each switch for continuity. If any of the switches is visibly damaged or only has intermittent continuity, replace it.
Enter model number to search for the required part specific to your product
Top Solution

02 - Kenmore Oven/Microwave Combo Micro Switch

A micro switch might be failing intermittently. Check each of the micro switches for signs of overheating, arcing, or burning. If you don’t see any obvious signs of failure, use a multimeter to test each switch for continuity. If any of the switches is visibly damaged or only has intermittent continuity, replace it.
Top Solution

03 - Kenmore Oven/Microwave Combo Switch Holder

The microwave switch holder is the component that houses the door switches behind the control panel. If the switch holder is damaged or misaligned, the switches may not be properly engaged resulting in the microwave shutting off unexpectedly. You will need to uninstall the control panel and inspect the switch holder to confirm it is in good condition and secured properly. Replace the switch holder with a new one if necessary.
Top Solution

04 - Kenmore Oven/Microwave Combo Main Control Board

Control boards are often misdiagnosed—before replacing the control board, first check more commonly defective parts, particularly the door switches. If all of the other components are working properly, replace the control board.
Top Solution

05 - Kenmore Oven/Microwave Combo Touchpad and Control Panel

To determine if the touchpad and control panel are defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad and control panel.
Highly Likely

06 - Kenmore Oven/Microwave Combo Touchpad

If the microwave runs for a few seconds and stops the touchpad might be at fault. This is not common. Generally speaking, if the microwave display is working and some of the buttons respond correctly but some don’t, the problem is with the touchpad.
Highly Likely