Choose Product
Identify Problem
03
Find Solutions

Norge Oven light is out

If your Norge oven light is out, the oven light not working is usually caused by a failed light assembly or bulb, but the oven control board should be checked first because it supplies voltage to nearly all oven electrical components. Although a defective control board is uncommon, use a multimeter to verify whether power reaches the light socket or light assembly. If the light switch has continuity but no voltage reaches the socket or assembly, the control board may need replacement. Next, inspect the light assembly, since its components may not be sold separately. Test the oven light bulb, halogen lamp, and light socket for continuity or install a known-good bulb to confirm the failure. If the socket receives power but the oven light still will not work, replace the socket. A damaged light housing can also prevent the bulb or light board from operating, especially when power reaches the assembly. Disconnect power before testing or replacing parts. Enter your Norge range, stove, or oven model number to find the exact oven light bulb, light assembly, socket, housing, halogen lamp, or control board replacement for your appliance.

01 - Norge Range/Stove/Oven Oven Control Board

The oven control board is used to send voltage to nearly all of the oven's electrical components including the lights. If the control board is defective, it may be unable to send voltage to the light bulb or light board, although this is not a common problem. You can use a multimeter to determine if power is reaching the light socket or light assembly. If power is not reaching the light socket or light assembly and the light switch tests positive for electrical continuity when tested with a multimeter, then the control board is likely defective and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Norge Range/Stove/Oven Light Assembly

If the oven light is out, the entire light assembly may need to be replaced. Often the light assembly components are not sold separately.
Top Solution

03 - Norge Range/Stove/Oven Light Bulb

To determine if the light bulb has burned out, use a multimeter to test it for continuity, or install the bulb into an identical socket to test it.
Top Solution

04 - Norge Range/Stove/Oven Halogen Lamp

To determine if a halogen lamp has failed, you can use a multimeter to test it for electrical continuity, or install the lamp into an identical socket to test it.
Top Solution

05 - Norge Range/Stove/Oven Light Socket

Use a multimeter to test for power to the light socket. If the light socket is getting power, but the oven light won’t work, this indicates that the light socket is defective. If the light socket is defective, replace it.
Top Solution

06 - Norge Range/Stove/Oven Light Housing

If you've determined the light bulb has not burned out or the light board appears to be functioning normally, it's possible that the light housing the bulb or board is installed in is faulty. Use a multimeter to determine if power is reaching the light socket or light assembly. If power is reaching the socket or assembly, then it's likely the light housing is malfunctioning and will need to be replaced.
Top Solution

Frequently Asked Questions

Why is my Norge oven light not working?
How do I know whether the Norge oven light socket is bad?
Could the Norge oven control board cause the oven light to be out?
How can I find the correct Norge oven light replacement part?
What should I check if my Norge oven light is still out after replacing the bulb?