Choose Product
Identify Problem
03
Find Solutions

Estate Oven light is out

Is your Estate oven light out? The problem may be the oven control board, light assembly, light bulb, halogen lamp, light socket, or light housing. The control board supplies voltage to the oven light, although it is not a common failure. Use a multimeter to check whether power reaches the light socket or light assembly, and verify that the light switch has continuity before replacing the board. Next, inspect the light assembly, since some components are not sold separately and the complete assembly may be required. A burned-out oven light bulb or halogen lamp is another common cause. Test the bulb or lamp for continuity, or install it in an identical socket. If the socket receives power but the oven light still does not work, replace the defective light socket. A faulty light housing can also prevent the bulb or light board from operating when power is present. These steps apply to an Estate range, stove, or oven with an oven light not working, oven light burned out, or oven light out. Enter your model number to find the exact replacement part for your Estate appliance.

01 - Estate Range/Stove/Oven Oven Control Board

The oven control board is used to send voltage to nearly all of the oven's electrical components including the lights. If the control board is defective, it may be unable to send voltage to the light bulb or light board, although this is not a common problem. You can use a multimeter to determine if power is reaching the light socket or light assembly. If power is not reaching the light socket or light assembly and the light switch tests positive for electrical continuity when tested with a multimeter, then the control board is likely defective and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Estate Range/Stove/Oven Light Assembly

If the oven light is out, the entire light assembly may need to be replaced. Often the light assembly components are not sold separately.
Top Solution

03 - Estate Range/Stove/Oven Light Bulb

To determine if the light bulb has burned out, use a multimeter to test it for continuity, or install the bulb into an identical socket to test it.
Top Solution

04 - Estate Range/Stove/Oven Halogen Lamp

To determine if a halogen lamp has failed, you can use a multimeter to test it for electrical continuity, or install the lamp into an identical socket to test it.
Top Solution

05 - Estate Range/Stove/Oven Light Socket

Use a multimeter to test for power to the light socket. If the light socket is getting power, but the oven light won’t work, this indicates that the light socket is defective. If the light socket is defective, replace it.
Top Solution

06 - Estate Range/Stove/Oven Light Housing

If you've determined the light bulb has not burned out or the light board appears to be functioning normally, it's possible that the light housing the bulb or board is installed in is faulty. Use a multimeter to determine if power is reaching the light socket or light assembly. If power is reaching the socket or assembly, then it's likely the light housing is malfunctioning and will need to be replaced.
Top Solution

Frequently Asked Questions

Why is my Estate oven light not working?
How do I know whether the Estate oven light bulb or socket is bad?
Could the Estate oven control board cause the oven light to stop working?
How do I replace an Estate oven light or light assembly safely?
How do I find the correct Estate oven light part using my model number?