Dacor Oven won't turn on

Won’t your Dacor oven turn on? Start with the touchpad and control panel. When some touchpad buttons respond but others do not, the touchpad or control panel is the most likely cause of an oven not turning on. If none of the buttons work, the control board is more likely defective. The Dacor oven control board supplies voltage to the oven's operating and heating components, so inspect it for damaged or shorted parts and use a multimeter to check voltage reaching the bake or broil circuits, following the wiring diagram. A failed bake or broil spark electrode can also keep a gas Dacor oven from starting because the electrode cannot ignite the burner. For electric models, a burned-out broil element may prevent proper operation. If the oven keeps heating after you turn it off, the main control board or a stuck relay is the likely problem. Before testing electrical parts, disconnect power and follow proper safety procedures. Enter your Dacor oven model number to find the exact replacement touchpad, control panel, control board, spark electrode, or broil element for your appliance.

01 - Dacor Range/Stove/Oven Touchpad and Control Panel

If an oven won't turn on, it's possible the touchpad and control panel is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad and control panel is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all Dacor Range/Stove/Oven Touchpad and Control Panel Parts

02 - Dacor Range/Stove/Oven Touchpad

If an oven won't turn on, it's possible the touchpad is defective. One way to help confirm this is to determine if some touchpad buttons respond while others don't. If some of the buttons still work, then it's quite probable the touchpad is faulty and requires replacement (if none of the buttons work, a defective control board is more likely the cause of the oven not turning on).

Shop all Dacor Range/Stove/Oven Touchpad Parts

03 - Dacor Range/Stove/Oven Control Board

The control board usually provides voltage to all of an oven's components, so a defective board can prevent the oven from turning on. If none of the oven control buttons are working, it's likely the control board is at fault. You can inspect the board for signs of damage or a shorted component. You can also use a multimeter to test for voltage reaching the bake or broil elements or igniters after reviewing the appliance's wiring diagram.

Shop all Dacor Range/Stove/Oven Control Board Parts

Highly Likely

04 - Dacor Range/Stove/Oven Bake or Broil Spark Electrode

For bake & broil burner ignition an oven burner spark electrode is used to ignite the gas. The electrode is a device that sits right next to the burner. It functions like a spark plug. As power is applied to it a spark jumps from the spark electrode tip to the to the electrode shield, igniting the gas. If the electrode is broken or worn out the spark may not occur. Visually inspect the electrode assembly for cracks in the porcelain housing or damage to the electrode tip itself. Be aware that a proper ground and the correct polarity of the incoming voltage to the range is necessary for the electrode control to sense the pre...sence of a flame once the burner is ignited. If the burner goes off after ignition check for proper ground and the correct polarity at the wall outlet.

Shop all Dacor Range/Stove/Oven Bake or Broil Spark Electrode Parts

Common

05 - Dacor Range/Stove/Oven Broil Element

When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the broil element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.

Shop all Dacor Range/Stove/Oven Broil Element Parts

Common

06 - Dacor Range/Stove/Oven Main Control Board

The main control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If one of the control board relays shorts closed, the control board may send continuous voltage to the heating circuit. If the oven continues to heat after it is turned off, the main control board is likely defective. If the control board is defective, replace it.

Shop all Dacor Range/Stove/Oven Main Control Board Parts

Common

Frequently Asked Questions

Why is my Dacor oven not turning on when some buttons still work?

What should I check if my Dacor oven has no power and none of the controls work?

Can a spark electrode stop my Dacor gas oven from starting?

How do I test a Dacor oven broil element if the oven won't start?

How do I find the correct replacement part for my Dacor oven?

Talk With Us

We can help you check an order, track a package, start a return, and more.

START A CHAT

Talk With Us

We can help you check an order, track a package, start a return, and more.

Join Repair Clinic's VIP email list for 10% off, plus other discounts and tips!

Our Story

Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.

About Repair Clinic

Customer Stories Repair Parts BrandsDIY Repair Blog In the News