Choose Product
Identify Problem
03
Find Solutions

Admiral Oven not self-cleaning

When your Admiral oven self clean is not working, start with the touchpad. When you press the self-clean button, the door lock indicator should light and the door lock motor should make a low humming sound. If neither happens, a faulty touchpad is the most likely cause. Next, check the door lock motor and switch assembly, especially if the oven door locked during the cycle but will not unlock afterward. The temperature control thermostat can also fail during self-cleaning even when the oven bakes and broils normally. A damaged door latch or faulty latch microswitch may prevent the cycle from starting because the door cannot lock securely. Less commonly, a defective oven control board may fail to send voltage to the heating circuit. Before testing or replacing parts, follow the safety instructions in your owner's manual and disconnect power when required. This self cleaning oven troubleshooting guide can help you identify the failed component. Enter your Admiral oven's model number to find the exact replacement touchpad, latch, lock assembly, thermostat, or control board for your appliance.

01 - Admiral Range/Stove/Oven Touchpad

The door lock indicator light should come on and you should hear the lock motor running when the self-clean button is pressed. If the indicator light does not come on and you don't hear a low humming noise as the door is being locked, it's likely the oven's touchpad is faulty and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Admiral Range/Stove/Oven Door Lock Motor and Switch Assembly

During the oven's self-cleaning cycle, the door lock switch activates the door lock motor to prevent the oven door from being opened. If the door lock motor and switch assembly is defective, the oven door will not unlock once the self-cleaning cycle is complete. On most ovens, you can open the oven door by removing certain screws or panels. Check your owner's manual for further instructions.
Top Solution

03 - Admiral Range/Stove/Oven Temperature Control Thermostat

The oven thermostat sends voltage to the heating circuit and regulates the temperature of the oven during the self-cleaning cycle. It is possible for the oven thermostat to function properly for baking and broiling but not for cleaning. Due to its complexity, the oven thermostat is difficult to test. If you suspect the oven thermostat is at fault, replace it.
Highly Likely

04 - Admiral Range/Stove/Oven Door Latch

For your safety, the self-clean cycle will not begin unless the oven door is locked. If the door latch is broken and unable to allow the door to be locked, the self-clean cycle will not begin. Inspect the latch for damage. You can also use a multimeter to test the latch assembly's microswitch, if applicable, to determine if the switch has appropriate electrical continuity. If the latch is damaged or the microswitch tests negative for continuity, the door latch should be replaced.
Highly Likely

05 - Admiral Range/Stove/Oven Oven Control Board

The oven control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Highly Likely

06 - Admiral Range/Stove/Oven Control Board

The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Common

Frequently Asked Questions

Why is my Admiral oven self-clean not working?
Why won't my Admiral oven door lock for the self-clean cycle?
Why is my Admiral oven door locked after self-cleaning?
Can an Admiral oven thermostat work for baking but not for self-cleaning?
How do I find the correct Admiral self-clean oven part?