Choose Product
Identify Problem
03
Find Solutions

Universal Oven not self-cleaning

If your Universal range, stove, or oven self-clean function is not working, start by checking whether the door lock indicator lights up and whether you hear the lock motor humming when you press the self-clean button. If there is no light or sound, a faulty touchpad is the most likely cause. Other common oven self-clean problems include a defective door lock motor and switch assembly, which can prevent the door from unlocking after the cycle, or a failed temperature control thermostat that works during baking and broiling but not during cleaning. A damaged door latch or faulty latch microswitch can also keep the cycle from starting because the door cannot lock securely. If those parts check out, the oven control board may not be sending voltage to the heating circuit. Before testing electrical components, disconnect power and follow your owner's manual. For accurate self cleaning oven troubleshooting, enter your Universal range, stove, or oven model number to find the exact replacement touchpad, door lock assembly, thermostat, door latch, or control board for your appliance.

01 - Universal Range/Stove/Oven Touchpad

The door lock indicator light should come on and you should hear the lock motor running when the self-clean button is pressed. If the indicator light does not come on and you don't hear a low humming noise as the door is being locked, it's likely the oven's touchpad is faulty and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Universal Range/Stove/Oven Door Lock Motor and Switch Assembly

During the oven's self-cleaning cycle, the door lock switch activates the door lock motor to prevent the oven door from being opened. If the door lock motor and switch assembly is defective, the oven door will not unlock once the self-cleaning cycle is complete. On most ovens, you can open the oven door by removing certain screws or panels. Check your owner's manual for further instructions.
Top Solution

03 - Universal Range/Stove/Oven Temperature Control Thermostat

The oven thermostat sends voltage to the heating circuit and regulates the temperature of the oven during the self-cleaning cycle. It is possible for the oven thermostat to function properly for baking and broiling but not for cleaning. Due to its complexity, the oven thermostat is difficult to test. If you suspect the oven thermostat is at fault, replace it.
Highly Likely

04 - Universal Range/Stove/Oven Door Latch

For your safety, the self-clean cycle will not begin unless the oven door is locked. If the door latch is broken and unable to allow the door to be locked, the self-clean cycle will not begin. Inspect the latch for damage. You can also use a multimeter to test the latch assembly's microswitch, if applicable, to determine if the switch has appropriate electrical continuity. If the latch is damaged or the microswitch tests negative for continuity, the door latch should be replaced.
Highly Likely

05 - Universal Range/Stove/Oven Oven Control Board

The oven control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Highly Likely

06 - Universal Range/Stove/Oven Control Board

The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Common

Frequently Asked Questions

Why is my Universal oven self-clean not working?
What should I check if my oven is locked after self-clean?
How do I test an oven door latch for self-clean problems?
Can the oven thermostat cause self-clean problems even if baking works?
How do I find the correct Universal oven self-clean replacement part?