Choose Product
Identify Problem
03
Find Solutions

Inglis Oven not self-cleaning

When your Inglis oven self-cleaning cycle will not start or complete, the touchpad is the most likely cause. Press the self-clean button and check whether the door lock indicator comes on and whether you hear the door lock motor humming. If there is no light or sound, the touchpad may be faulty. If the cycle starts but the Inglis oven door will not unlock afterward, the door lock motor and switch assembly may be defective. A failing temperature control thermostat can also prevent the oven from reaching or regulating the high temperature required for cleaning, even if baking and broiling work normally. Next, inspect the door latch. The self-clean cycle will not begin unless the latch can secure the door and activate its microswitch. If these parts test good, a faulty oven control board may not send voltage to the bake and broil circuits. This self-cleaning oven troubleshooting guide can help you identify the failed part before replacing it. Enter your Inglis oven model number to find the exact replacement touchpad, door lock assembly, thermostat, latch, or control board for your appliance.

01 - Inglis Range/Stove/Oven Touchpad

The door lock indicator light should come on and you should hear the lock motor running when the self-clean button is pressed. If the indicator light does not come on and you don't hear a low humming noise as the door is being locked, it's likely the oven's touchpad is faulty and will need to be replaced.
Enter model number to search for the required part specific to your product
Top Solution

02 - Inglis Range/Stove/Oven Door Lock Motor and Switch Assembly

During the oven's self-cleaning cycle, the door lock switch activates the door lock motor to prevent the oven door from being opened. If the door lock motor and switch assembly is defective, the oven door will not unlock once the self-cleaning cycle is complete. On most ovens, you can open the oven door by removing certain screws or panels. Check your owner's manual for further instructions.
Top Solution

03 - Inglis Range/Stove/Oven Temperature Control Thermostat

The oven thermostat sends voltage to the heating circuit and regulates the temperature of the oven during the self-cleaning cycle. It is possible for the oven thermostat to function properly for baking and broiling but not for cleaning. Due to its complexity, the oven thermostat is difficult to test. If you suspect the oven thermostat is at fault, replace it.
Highly Likely

04 - Inglis Range/Stove/Oven Door Latch

For your safety, the self-clean cycle will not begin unless the oven door is locked. If the door latch is broken and unable to allow the door to be locked, the self-clean cycle will not begin. Inspect the latch for damage. You can also use a multimeter to test the latch assembly's microswitch, if applicable, to determine if the switch has appropriate electrical continuity. If the latch is damaged or the microswitch tests negative for continuity, the door latch should be replaced.
Highly Likely

05 - Inglis Range/Stove/Oven Oven Control Board

The oven control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Highly Likely

06 - Inglis Range/Stove/Oven Control Board

The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.
Common

Frequently Asked Questions

Why is my Inglis oven self-clean not working?
Why is my Inglis oven door locked after self-cleaning?
How do I test the door latch on an Inglis oven?
Could the thermostat or oven control board keep my Inglis oven from self-cleaning?
How do I find the correct Inglis self-clean oven part?