Choose Product
Identify Problem
03
Find Solutions

Roper Oven door damaged or not functioning properly

If your Roper oven door is damaged, not closing properly, or difficult to operate, the door hinge is the most likely cause. A bent or broken left or right door hinge can keep the door from aligning with the oven frame, and replacing the hinge is often a manageable oven door repair for a DIYer. A broken outer door glass is another common problem, while a torn door gasket can prevent a tight seal, make the oven not heat properly, and stop the self-clean cycle from working. Less common causes include broken inner door glass, a damaged glass window, or a loose or visibly damaged door handle. Before repairing broken Roper oven door glass, remove the door and place it on a sturdy, flat surface, and wear eye and hand protection because the glass is tempered. Check the hinges, gasket, handle, door panels, and mounting screws for damage before ordering parts. Enter your Roper range, stove, or oven model number to find the exact replacement door hinge, door glass, door gasket, or door handle for your appliance.

01 - Roper Range/Stove/Oven Door Hinge

An oven door repair may be needed if the door hinge breaks or is bent out of shape. Oven doors have two door hinges, a left and right. On some ovens the same hinge is used, on other ovens the right hinge and left hinge have different part numbers. The door hinge sometimes is sold with all necessary parts and springs, other times the parts need to be ordered separately. An oven door repair for a door hinge is a relatively easy repair for a do-it-yourselfer.
Enter model number to search for the required part specific to your product
Top Solution

02 - Roper Range/Stove/Oven Outer Door Glass

If the outer door glass is broken, it can be replaced. This oven door repair requires that the oven door be removed from the oven and layed down on a sturdy flat surface. The outer door glass is made of tempered glass. Use eye and hand protection when performing this oven door repair.
Top Solution

03 - Roper Range/Stove/Oven Door Gasket

An oven door gasket that is torn or damaged will not provide a good seal between the door and the oven frame, resulting in the oven having trouble heating up to the correct temperature and preventing the oven from going into its self-clean mode.
Highly Likely

04 - Roper Range/Stove/Oven Glass Window

If the outer or inner door glass (window) is broken, it can be replaced. This oven door repair requires that the oven door be removed from the oven and layed down on a sturdy flat surface. The door glass is made of tempered glass. Use eye and hand protection when performing this oven door repair.
Less Common

05 - Roper Range/Stove/Oven Inner Door Glass

The oven's inner door glass can break if a pot or heavy tray is dropped on it when the door is in the open position. A new inner door glass can usually be replaced by uninstalling the door and removing the screws to separate the inner and outer door panels.
Less Common

06 - Roper Range/Stove/Oven Door Handle

An oven door handle that is loose or visibly damaged should be replaced to ensure safe oven operation.
Less Common

Frequently Asked Questions

How do I fix a Roper oven door that will not close?
Can I replace the glass in a damaged Roper oven door?
Can a bad oven door gasket cause a Roper oven not to heat properly?
How do I replace a loose or broken Roper oven door handle?
How do I find the correct replacement part for my Roper oven door?