When your Tappan oven fan won't turn off, the oven fan may be receiving continuous power from a stuck relay on the oven control board, control board, or main control board. These boards regulate the fan circuit, and a relay that has shorted closed can keep the fan running even after the oven is turned off. Before replacing a control board, check the wiring diagram and test the oven thermostats, since control boards are often misdiagnosed. In some cases, the fan is operating normally during its cooling-down period and may run for more than an hour, especially after a high-temperature cooking cycle. If the fan keeps running after the Tappan oven has cooled completely, test the high-limit thermostat with a multimeter for proper continuity. A defective thermostat can continue sending voltage to the fan. Always disconnect power before testing or replacing parts. Enter your model number to find the exact replacement oven control board, main control board, high-limit thermostat, or thermostat for your Tappan range, stove, or oven.
01 - Tappan Range/Stove/Oven Oven Control Board
The oven control board has relays that regulate power to the bake, broil and fan circuits according to the user settings and sensor input. If one of these relays shorts out, the control board may send continuous voltage to the oven fan. However, this is rarely the case. Before replacing the control board, first check the oven thermostats. If an oven thermostat fails, it may cause the oven fan to run continuously.
Enter model number to search for the required part specific to your product
If the oven fan is not shutting off, a relay on the control board may be stuck closed sending constant power to the oven fan. Check the wiring diagram first before replacing the board. Control boards are often misdiagnosed.
The main control board has relays that send voltage to the fan motor. If one of the control board relays shorts closed, the control board may send continuous voltage to the fan. If the fan continues to run after the oven is turned off and cooled down, the main control board is likely defective. If the control board is defective, replace it.
The oven cooling fan may run well over an hour after the oven is shut off to cool down the components. The hotter the temperature was set the longer the cooling fan needs to run to cool off the oven. This is normal.
Less Common
05 - Tappan Range/Stove/Oven High Limit Thermostat
The high limit thermostat sends voltage to the oven fan as the oven heats up. If the high limit thermostat is defective, it may keep sending voltage to the oven fan after the oven has cooled down. To determine if the high limit thermostat is at fault, use a multimeter to test the thermostat for continuity. If the high limit thermostat does not have continuity, replace it.
The thermostat sends voltage to the oven fan as the oven heats up. If the thermostat contacts are stuck closed, the thermostat may continue to send voltage to the oven fan after the oven has cooled down. To determine if the thermostat is at fault, use a multimeter to test the thermostat for continuity. If the thermostat shows continuity at any temperature, this indicates that the thermostat is defective. If the thermostat is defective, replace it.