An Amana gas stove burner that won't turn off usually has a faulty burner valve or surface burner valve that cannot close the gas flow. This is the most likely cause when the burner stays lit even after you turn the control knob to the off position. Remove the knob and carefully try turning the valve stem by hand. If the stem will not rotate, or the gas burner won't turn off, replace the defective valve. If the valve stem turns normally, inspect the burner control knob next. A cracked or damaged knob may not grip and turn the gas valve stem, leaving the burner on. The separate knob may show the same problem and also require replacement. If your gas stove won't turn off, shut off the gas supply if you cannot stop the flame safely, and do not continue using the burner until the problem is repaired. Enter your Amana gas stove's model number to find the exact replacement burner valve, surface burner valve, control knob, or knob for your specific range.
01 - Amana Range/Stove/Oven Valve
A stove burner that won't turn off could be caused by a faulty burner valve that is unable to close. Try removing the control knob and turning the valve stem by hand. If the stem will not rotate, or the burner stays on in the off position, the valve is likely defective and should be replaced.
Enter model number to search for the required part specific to your product
A stove burner that won't turn off could be caused by a faulty surface burner valve that is unable to close. Try removing the control knob and turning the valve stem by hand. If the stem will not rotate, or the burner stays on in the off position, the valve is likely defective and should be replaced.